Celejar wrote: > I'm not sure exactly what networking scheme you're describing, but I > explained why there's no easy, good solution in the original thread. > Basically, the home network uses 192.168.0.0/24, as do other LANS I > connect to. My VPN uses 10.0.0.0/24. When the laptop is connected > locally at home, it's 192.168.0.x, but when it's connected remotely, > it's 10.0.0.x. > > Just to be clear, the issue is not reaching the hosts on the local > network from the laptop: that's simple. The issue is having the hosts on > the local network be able to initiate connections to the laptop without > knowinng or caring whether it's connected locally or over the VPN.
It is simple and it does the trick. Check your server config. # Push routes to the client to allow it # to reach other private subnets behind # the server. Remember that these # private subnets will also need # to know to route the OpenVPN client # address pool (10.8.0.0/255.255.255.0) # back to the OpenVPN server. ;push route 192.168.10.0 255.255.255.0 ;push route 192.168.20.0 255.255.255.0 push "route 10.1.1.0 255.255.255.0" push "route 192.168.1.0 255.255.255.0" regards
