You are correct. That was an oversight. Of all the items on that page I could probably afford the screwdriver and the heatsinks.
I would like to keep the budget under $500 not including the hard drive(s) I already have drives. Less is better. -- Steven Mainor On August 7, 2019 1:52:15 AM EDT, Richard Hector <rich...@walnut.gen.nz> wrote: >On 7/08/19 5:29 PM, Steven Mainor wrote: >> Hi all, >> >> I'm looking for advice on how to build a home server with a primary >focus on >> security. I plan to run nextcloud and a mail server that will serve 3 >to 5 >> people at most. >> >> My requirements are: >> >> A server setup that can be run with completely open source software >and >> doesn't require any binaries to boot. I don't trust anything closed >source for >> this particular project. >> >> A gigabit ethernet port. >> >> A USB3.0 port or SATA connector to attach storage to. >> >> Enough processor power and ram to run nextcloud and the mail server >from an >> encrypted hard drive (LUKS) efficiently with moderate throughput >saving and >> reading files from nextcloud. >> >> I would just build something x86 based but the amd/intel Platform >Security >> Processor/IME stuff makes me nervous. >> >> So far I have been looking at single board computers like the ones >listed >> here: https://wiki.debian.org/CheapServerBoxHardware#OSHW >> >> I like the OLinuXino A20 LIME2 but I am not sure the processor will >be enough >> to handle the overhead from an encrypted hard drive. I also don't >like that it >> is only 32-bit since that will limit the file size nextcloud can >handle as I >> understand it. >> >> Is there anything similar to the OLinuXino A20 LIME2 but more >powerful or is >> there a better option I haven't read about yet? > >You haven't mentioned a budget, but strong emphasis on security and >openness ... > >https://www.raptorcs.com/TALOSII/ ? > >Richard
