Hello,
I have a toshiba usb drive. With smartctl i can see some values, hddtemp
show nothing:
smartctl -i /dev/sdc; smartctl -a /dev/sdc | grep 194
smartctl 6.6 2016-05-31 r4324 [i686-linux-4.9.0-9-686-pae] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: TOSHIBA MQ01ACF050
Serial Number: xxx
LU WWN Device Id: 5 000039 653f02365
Firmware Version: AV001U
User Capacity: 500.107.862.016 bytes [500 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ATA8-ACS (minor revision not indicated)
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Tue Jun 25 09:29:26 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
194 Temperature_Celsius 0x0022 100 100 000 Old_age Always
- 39 (Min/Max 18/48)
hddtemp /dev/sdc --debug
================= hddtemp 0.3-beta15 ==================
Modell: TOSHIBA
I also try to add the drive to database, with the same result.
hddtemp /dev/sdc --debug --drivebase| grep Tos
MK4313MAT | 220 | Toshiba MK4313MAT
TOSHIBA MK1517GAP | 0 | Toshiba MK1517GAP
TOSHIBA MK2018GAS | 226 | Toshiba MK2018GAS
TOSHIBA MK3017GAP | 0 | Toshiba MK3017GAP
TOSHIBA MQ01ACF050 | 194 | Toshiba MQ01ACF050
