It lists it as a VGA Compatible controller S3 Inc 86c764/765 [Trio32/64/64+]
The x error is Assigning device section with no busID to primary device (EE) No devices detected. Fatal Server error: No Screens found. -----Original Message----- From: Kent West [mailto:[EMAIL PROTECTED] Sent: Tuesday, December 09, 2003 11:49 AM To: [EMAIL PROTECTED] Subject: Re: Virtual PC 5.2 Michael Martinell wrote: > > > I have tried every card (I think) listed and I have not had any luck > with virtual pc. > > > > If anybody out there knows what it takes to configure the startx for the > virtual pc environment I would be interested. I know that it works, as > I had it running with Knoppix at one time. Unfortunately my knoppix > disk got a big scratch and I have not downloaded it again. > > > > I have been using dpkg-reconfigure xserver-xfree86 to try to set this up. > Does "lspci" give you any indication as to what video chipset is detected? > > > > <In Response to> > > > > Hi, > > > > I hope this is the place for newbie questions... > > > > I am trying to install Debian on Virtual PC 5.2 (on a wintel box) > > > > The first part of the install works fine, but I am having trouble > > getting X-Windows to work. I have edited the XF86Config file > > to use the s3 driver, but I think I have made a mistake somewhere. > > > > The output from startx (or at least the last part of the output) > > is: > > > > (II) S3VIRGE: driver (version 1.6.13) for S3 ViRGE chipsets: virge, > > 86C3 > > virge vx, 86C988, virge dx, virge gx, 86C375, 86C385, virge > > gx2, > > 86C357, virge mx, 86C260, virge mx+, 86C280, trio 3d, 86C365, > > trio 3d/2x, 86C362, 86C368 > > (--) Assigning device section with no busID to primary device > > (EE) No devices detected. > > > > Fatal server error: > > no screens found > > > > I can't figure out if this means that the driver is not detecting the > > video card, or whether it means I have made a mistake in the > > configuration > > file. Any help on this would be appreciated. > > > > Adelle. > > > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
