On Wed, 10 Dec 2003 02:54, Rajkumar S wrote: > Paul E Condon wrote: > > Look at jigdo. As I recall, you can start a jigdo construction of an > > iso by first giving an iso that is almost right, i.e. the prior rev. > > , and then proceeding to download only the corrections that are > > needed. It is covered in the jigdo instructions, or FAQ, don't > > remember exactly. > > It seems the jigdo files are not updated at the time being. The images > are dated 19-Dec-2002 for r1. May be they are working on it.
Indeed they are, the jigdos and templates are downloadable from: http://cdimage.debian.org/debian-cd/jigdo/3.0_r2/ After the download, if you have r1 or r2 on disc as an iso mount the iso on the loopback device as /mnt and give that to jigdo-lite in the files section. Otherwise if you have the images on cdrom mount the /cdrom? and give it that. Also if you've been keeping your installation updated via apt input this line to jigdo-lite, in the files section, as well: /var/cache/apt/archives/ As it happens, I'm downloading NONUS for i386 as I write this, and only 40 odd files need to downloaded out of 1600 or so. YMMV depending what you have installed of course. HTH Bob Parker -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
