On 12/30/2018 12:40 AM, Gary Dale wrote: > I've added a second NIC to a server and am trying to configure the > virtual bridge network to work with it. > > I configured the network bonding initially as per > https://wiki.debian.org/Bonding#Using_systemd-networkd but I couldn't > get virt-manager to take bond0 as the bridge device (using the Virtual > Machine Manager gui). I eventually go it to accept it by removing the > [Network] Address, etc. from my /etc/networkd-systemd/management.network > file (which I normally use to specify the bond0 address, etc.) and then > reworked my old /etc/network/interfaces file to refer to bond0 instead > of eth0. > > This seems to bring up bond0 with br0 having the correct static IP, > etc.. However it seems somewhat archaic. I think it should be possible > to use only systemd-networkd to make this work. Also, I may have some > issues with connectivity - initial connections to the virtual machine > sometimes fail. > > Any suggestions? >
Some untested hints: https://www.reddit.com/r/linuxadmin/comments/5tsitj/systemdnetworkd_bond_bridge_vlan/ https://serverfault.com/questions/914327/issue-with-bond-vlan-bridge-on-top-of-systemd-network https://www.linux-kvm.org/page/HOWTO_BONDING#Problem_with_Bridge_.2B_Bonding -- John Doe
