> > > > Truly, it boots correctly with the old kernel 3.2, but not with 3.16. > > > > In the kernel 3.16 case, moreover, when the initramfs prompt is shown, it > > seems not to load the usb keyboard so i'm truly able to do anything. > > This sounds like the initramfs doesn't have the appropriate modules > built into it. > I suspect that your /etc/initramfs-tools/initramfs.conf has MODULES=dep. > You should try changing that to MODULES=most; and then rebuild the > initramfs using something like: > update-initramfs -vu; >
Unfortunately is already 'most'. There is a way to check which modules are included in the actual initramfs? I'm not sure how initramfs works when you have different kernels available. There is an initramfs image for each kernel? I mean, if I do an update-initramfs and I booted with kernel 3.2, the command will affect the 3.2 initramfs or the 3.26 initramfs? If I screw up the old kernel boot I couldn't boot for good. > This should provide information on the modules that are being added to > the initramfs, which should include the lvm modules and the ehci > modules. [The missing ehci/ohci modules are likely what is causing your > USB keyboard to not work.] Yes, there's a specific module to manage raid? Maybe the problem it's that. 2018-01-09 22:56 GMT+01:00 Don Armstrong <d...@debian.org>: > On Tue, 09 Jan 2018, Elisabetta Falivene wrote: > > > Hi, > > I did an upgrade from debian 7 wheezy to debian 8 jessie on the master > of a > > cluster (1 master + 8 nodes). It seemed all went well. Then I rebooted > the > > machine and the problems began. I can't boot the master anymore returning > > an error: > > > > *Running scripts/local-block* > > > > *Unable to find LVM volume* > > [...] > > *modprobe: module ehci-pci not found in modules.dep* > > [...] > > > Truly, it boots correctly with the old kernel 3.2, but not with 3.16. > > > > In the kernel 3.16 case, moreover, when the initramfs prompt is shown, it > > seems not to load the usb keyboard so i'm truly able to do anything. > > This sounds like the initramfs doesn't have the appropriate modules > built into it. > > I suspect that your /etc/initramfs-tools/initramfs.conf has MODULES=dep. > You should try changing that to MODULES=most; and then rebuild the > initramfs using something like: > > update-initramfs -vu; > > This should provide information on the modules that are being added to > the initramfs, which should include the lvm modules and the ehci > modules. [The missing ehci/ohci modules are likely what is causing your > USB keyboard to not work.] > > -- > Don Armstrong https://www.donarmstrong.com > > The major difference between a thing that might go wrong and a thing > that cannot possibly go wrong is that when a thing that cannot > possibly go wrong goes wrong it usually turns out to be impossible to > get at or repair. > -- Douglas Adams _Mostly Harmless_ > >
