On Thu, 23 Nov 2017 10:56:37 +0100 (CET) Pierre Frenkiel <pierre.frenk...@gmail.com> wrote:
> On Wed, 22 Nov 2017, Jape Person wrote: > > > Which GNU/Linux? Debian? If so, you should specify whether > > you're using a release or testing or unstable. It could make a > > difference, particularly with respect to the drivers available > > in CUPS. > > I was not aware that it was so important. My release is Stretch. > I did so many tries with all proposed URI (socket://, lpd://, > ipp:// ...) that it would too long to report all. > Anyway, I could get an almost working config with > DeviceURI lpd://BRWF8DA0C80F39D/BINARY_P1 > and > brother-HLL2340D-cups-en.ppd > My problem is now that input setting is "Tray1", but > the printer ignores it, and asks for "manual feed", > I'll try whether this can be fixed with Windows, unless you have > an other suggestion. > > best regards, Hi, When you care about spending too much ink on printing while testing, I can recommend to install libreoffice writer and then download 1cm-paper.odt ,this one spills minimal ink You can download it here: https://extensions.libreoffice.org/templates/1cm-squared-paper This one is a good demonstration to compare printing in 600 dpi or 1200 dpi. greetings.
