Ciao a tutti, I have a strange problem with a fresh jessie with the same configuration of the previous working very well.
If I start openvpn with systemd (with "service openvpn start" command) or with the gnome panel command the route configured is only for the server and not the subnet for the vpn. This is the routing table usgin these commands: default via 10.150.29.1 dev eth0 proto static metric 1024 10.150.29.0/24 dev eth0 proto kernel scope link src 10.150.29.101 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.73.1 dev tun0 proto kernel scope link src 192.168.73.5 (192.168.73.X is the subnet for the vpn). But, if I start openvpn directly with the command openvpn --config server.conf the resulting route is correct: default via 10.150.29.1 dev eth0 proto static metric 1024 10.150.29.0/24 dev eth0 proto kernel scope link src 10.150.29.101 169.254.0.0/16 dev eth0 scope link metric 1000 192.168.73.0/24 via 192.168.73.1 dev tun0 192.168.73.1 dev tun0 proto kernel scope link src 192.168.73.5 With the same configuration, changing only the authentication, it works perfectly on a sid with every command I use. -- leandro 1A0B 125B 2E4D 2DAE 4E26 4551 88FB BBCC 7A29 640B https://bbs.cybervalley.org/ChiaveLeandro/gpg.html http://6xukrlqedfabdjrb.onion La caratteritica principale dei miracoli รจ che non accadono
