How about using graphical pptp client, like network manager? Eero
2016-10-07 4:04 GMT+03:00 Li Wei <root...@yahoo.com>: > I want to use vpn to bypass censor. > In XP, it's OK > In Linux I have installed and run pptp-linux: > > Using interface ppp0 > Connect: ppp0 <--> /dev/pts/1 > CHAP authentication succeeded > MPPE 128-bit stateless compression enabled > local IP address 192.168.115.34 > remote IP address 192.168.115.1 > > though I can visit sites not blocked by censor in Iceweasel > I still can't visit sites blocked by censor > > below is by the Linux route command: > > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > default www.routerlogin 0.0.0.0 UG 0 0 0 > eth0 > 192.168.1.0 * 255.255.255.0 U 0 0 0 > eth0 > > I think sth. is wrong. Below is by Windows XP route command: > (Note that I have changed the real IP to 103.72.6.116.) > > ============================================================ > =============== > Interface List > 0x1 ........................... MS TCP Loopback interface > 0x10003 ...00 19 21 d1 80 74 ...... Realtek RTL8139 Family PCI Fast > Ethernet NIC > 0x20004 ...00 53 45 00 00 00 ...... WAN (PPP/SLIP) Interface > ============================================================ > =============== > ============================================================ > =============== > Active Routes: > Network Destination Netmask Gateway Interface Metric > 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.3 > 21 > 0.0.0.0 0.0.0.0 192.168.115.34 192.168.115.34 1 > 103.72.6.116 255.255.255.255 192.168.1.1 192.168.1.3 > 20 > 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 > 192.168.1.0 255.255.255.0 192.168.1.3 192.168.1.3 > 20 > 192.168.1.3 255.255.255.255 127.0.0.1 127.0.0.1 > 20 > 192.168.1.255 255.255.255.255 192.168.1.3 192.168.1.3 > 20 > 192.168.115.34 255.255.255.255 127.0.0.1 127.0.0.1 > 50 > 192.168.115.255 255.255.255.255 192.168.115.34 192.168.115.34 > 50 > 224.0.0.0 240.0.0.0 192.168.1.3 192.168.1.3 > 20 > 224.0.0.0 240.0.0.0 192.168.115.34 192.168.115.34 1 > 255.255.255.255 255.255.255.255 192.168.1.3 192.168.1.3 1 > 255.255.255.255 255.255.255.255 192.168.115.34 192.168.115.34 1 > Default Gateway: 192.168.115.34 > ============================================================ > =============== > Persistent Routes: > None > > > > What should I do to get iceweasel working? > Thanks in advance! > > > >
