On Tue, Mar 15, 2016 at 8:25 AM Thomas Schmitt <scdbac...@gmx.net> wrote:
> Hi, > > Jan Gregor wrote: > > does anybody uses this burner in debian jessie ? > > I don't have this burner, but i am interested in such problems in general. > > > > So far I was succesful with burning to bd-re medium > > This means its blue laser lens is not blind. > > > failed with bd-r medium with i/o error after start of burning > > Did it show three hex numbers in "SK=.../ASC=.../ACQ=..." ? > If so, please share these numbers. They are the SCSI error code > received from the burner. > I think no, but I will check it and in future I'll care of it. After message about formatting of the media I saw about 10 lines of write buffer with very high estimate followed by error message WRITE@LBA Input/output error > > the drive should have buffer underrun protection. > > Buffer underrun is not an issue with BD-R. Only with CD-R[W] and DVD-R[W]. > Well, I'm not sure. In my case is default write speed is 6x and my burner uses USB2 port. I found some posts about recommended speed. > > Can you recommend arguments to growisofs or some configuration to the > > drive to minimize number of wasted bd-r media ? > > You may reduce speed by option. > -speed=1 > I'll definitely check it. > > But depending on the SCSI error code your problem might have other > reasons. > > > Have a nice day :) > > Thomas > >
