Hello, So the issue seemed to be a bios settings. By default the system is set up for some sports of intel recovery raid. Dell e7470 Samsung NVME 512GB. I presume this will be the case for all m.2 connected devices on dell latitude line. Changing the SATA controls to AHCI or "disable sata" leaving only m.2 causes the disk to show up in legacy boot and it gets detected by installer on debian stable.
As far as grub it does fail during installation. You do need to follow part of the: http://www.poweredbyjeff.com/2015/10/29/Intel-750-SSD-in-Debian-Jessie/ cd /target mount --rbind /proc proc/ mount --rbind /sys sys/ mount --rbind /dev dev/ mount --rbind /run run/ chroot . /bin/bash then apt-get update apt-get install grub-efi-amd64 update-grub grub-install #grub-install failed saying no target specified...so you need to point it at the disk. grub-install /dev/nvme0n1 #it should say install successful or something along these lines. Then continue without boot... Why the grub-install fails I'm not sure. I noticed only grub-common was installed if that makes any difference....but anyway. Thanks Luca On Tue, Feb 2, 2016 at 9:33 PM, Lukasz Szybalski <szybal...@gmail.com> wrote: > Hello, > We just purchased 4 Dell e7470 Laptops for work. 512GB Samsung NVMe drives. > > We are trying to install Debian Stable but it doesn't detect the drive. > We are trying to install Debian testing but it doesn't detect the drive. > > I see a ticket 786149 which is marked as fix. Can you give a confirmation > which ISO works with NVMe drives? > Do I need to use a different iso with some extra firmware? > What can I do to get the debian-installer to detect the drives? > https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=785149 > grub-installer: NVMe boot drives not supportedThanks > Lucas > > > > http://lucasmanual.com/ <http://lucasmanual.com/blog/>
