USB 2 and APIC Question.

[Thomas H. George]

I am trying to get a Sony USB DVD+R+RW drive working with an Albatron 
KX400-8XV motherboard and a 2.6.0-test9 kernel.  An Epson Stylus C82 USB 
printer is also attached to the system.

With APIC enabled in BIOS and booting up with a 2.4.22 kernel both the 
DVD drive and the printer are recognized as speed 12 devices,  cdrecord 
-scanbus reports the DVD drive on scsibus1 at 1,0,0 and with ln -s 
/dev/sr1 /dev/dvd the DVD drive can haltingly play a movie dvd. 
(scsibus0 0,0,0 is a CD-ROM drive)

With APIC enabled in BIOS and booting up with a 2.6.0-test9 kernel the 
DVD drive is not recognized and a continuing stream of messages of 
failures to assign a device number scroll up the console.

With APIC disabled in BIOS and booting up with the 2.6.0-test9 kernel 
the DVD drive is recognized as a speed 480 device and there is no longer 
a scsibus1.  Clearly the link to /dev/sr1 is no longer appropriate but 
what is the appropiate link?  The only usb devices seem to be usblp0 and 
usbmouse.

I am searching /var/log/syslog for a clue but have not found the correct 
dev as yet.  Does anyone know what it is?

Tom George

--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]