I disabled com1 & com2 hardware ports in the BIOS and booted into Linux the dmesg log concerning the serial ports is as follows:
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled Redundant entry in serial pci_table. Please send the output of lspci -vv, this message (12b9,1008,12b9,00d3) and the manufacturer and name of serial board or modem board to [EMAIL PROTECTED] ttyS04 at port 0xd000 (irq = 19) is a 16550A I noticed while in BIOS the only IRQ1 thru 14 are listed. Does this matter? After extracting dmesg, I returned to command line and issued the following: echo "ADTD3633070" > /dev/ttyS3 echo "ADTD3633070" > /dev/ttyS4 Niether command resulted in any sound from the modem and no errors were reported. Regards; Hoyt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
