my modem who was working fine have now mysteriously a strange behaviour. To have a connexion i must lauch pon something like 30 times. ;(( i put in my message a copy of the /var/log/syslog file and other useful modem configuration file. If anyone have any clues about what is wrong , it will be welcome. I know nothing about modem configuration, but i can read man page and understand it , and read howto
thanks more /etc/ppp/peers/provider # These are the options to dial out to your default service provider. # Please customize them correctly. Only the "provider" file will be # handled by poff and pon (unless with extra command line arguments). # You usually need this if there is no PAP authentication noauth # The chat script (be sure to edit that file, too!) connect "/usr/sbin/chat -v -f /etc/chatscripts/provider" # Set up routing to go through this PPP link defaultroute # Default modem (you better replace this with /dev/ttySx!) /dev/modem # Speed 38400 # Keep modem up even if connection fails persist more /etc/chatscripts/provider # This is the chat script used to dial out to your default service provider. # Please customize the entries enclosed in parenthesis to match your setup. # Only the "provider" file will be handled by poff and pon (unless with # extra command line arguments). # # Remember to edit /etc/ppp/peers/provider accordingly. # # ATZW2 as a default init string # - On all hayes compatible modems, W2 will correctly report the connect # speed. # ABORT BUSY ABORT "NO CARRIER" ABORT VOICE ABORT "NO DIALTONE" "" ATZW2 OK ATDT<put phone number here> ogin <put login name here> word \q<put password here> [EMAIL PROTECTED]:/home/claude$ more syslog.pppd Nov 12 10:15:52 dyan pppd[983]: pppd 2.4.1 started by claude, uid 1002 Nov 12 10:16:22 dyan pppd[983]: Serial connection established. Nov 12 10:16:22 dyan pppd[983]: using channel 1 Nov 12 10:16:22 dyan pppd[983]: Using interface ppp0 Nov 12 10:16:22 dyan pppd[983]: Connect: ppp0 <--> /dev/ttyS1 Nov 12 10:16:23 dyan pppd[983]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xc4a6f75c> <pcomp> <accomp>]Nov 12 10:16:53 dyan pppd[983]: LCP: timeout sending Config-Requests Nov 12 10:16:53 dyan pppd[983]: Connection terminated. Nov 12 10:16:54 dyan pppd[983]: Exit. Nov 12 10:19:10 dyan pppd[1019]: pppd 2.4.1 started by claude, uid 1002 Nov 12 10:19:44 dyan pppd[1019]: Serial connection established. Nov 12 10:19:44 dyan pppd[1019]: using channel 2 Nov 12 10:19:44 dyan pppd[1019]: Using interface ppp0 Nov 12 10:19:44 dyan pppd[1019]: Connect: ppp0 <--> /dev/ttyS1 Nov 12 10:19:45 dyan pppd[1019]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x814be76a> <pcomp> <accomp>]Nov 12 10:19:57 dyan pppd[1019]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x814be76a> <pcomp> <accomp>]Nov 12 10:19:59 dyan pppd[1019]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MD5> <pcomp> <accomp> <mrru 1500> <endpoint [MAC:00:d0:52:02:18:42]>]Nov 12 10:19:59 dyan pppd[1019]: sent [LCP ConfRej id=0x1 <mrru 1500>] Nov 12 10:20:00 dyan pppd[1019]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x814be76a> <pcomp> <accomp>]Nov 12 10:20:12 dyan pppd[1019]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x814be76a> <pcomp> <accomp>]Nov 12 10:20:15 dyan pppd[1019]: LCP: timeout sending Config-Requests Nov 12 10:20:15 dyan pppd[1019]: Connection terminated. Nov 12 10:20:16 dyan pppd[1019]: Exit. Nov 12 10:28:56 dyan pppd[1123]: pppd 2.4.1 started by claude, uid 1002 Nov 12 10:29:43 dyan pppd[1123]: Serial connection established. Nov 12 10:29:43 dyan pppd[1123]: using channel 3 Nov 12 10:29:43 dyan pppd[1123]: Using interface ppp0 Nov 12 10:29:43 dyan pppd[1123]: Connect: ppp0 <--> /dev/ttyS1 Nov 12 10:29:44 dyan pppd[1123]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x34062020> <pcomp> <accomp>]Nov 12 10:29:44 dyan pppd[1123]: rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth chap MD5> <pcomp> <accomp> <mrru 1500> <endpoint [MAC:00:d0:52:02:18:42]>]Nov 12 10:29:44 dyan pppd[1123]: sent [LCP ConfRej id=0x1 <mrru 1500>] Nov 12 10:29:44 dyan pppd[1123]: rcvd [LCP ConfReq id=0x2 <asyncmap 0x0> <auth chap MD5> <pcomp> <accomp> <endpoint [MAC:00:d0:52:02:18:42]>]Nov 12 10:29:44 dyan pppd[1123]: sent [LCP ConfNak id=0x2 <auth pap>] Nov 12 10:29:44 dyan pppd[1123]: rcvd [LCP ConfReq id=0x3 <asyncmap 0x0> <auth pap> <pcomp> <accomp> <endpoint [MAC:00:d0:52:02:18:42]>]Nov 12 10:29:44 dyan pppd[1123]: sent [LCP ConfAck id=0x3 <asyncmap 0x0> <auth pap> <pcomp> <accomp> <endpoint [MAC:00:d0:52:02:18:42]>]Nov 12 10:29:47 dyan pppd[1123]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x34062020> <pcomp> <accomp>]Nov 12 10:29:47 dyan pppd[1123]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x34062020> <pcomp> <accomp>]Nov 12 10:29:47 dyan pppd[1123]: sent [LCP EchoReq id=0x0 magic=0x34062020] Nov 12 10:29:47 dyan pppd[1123]: sent [PAP AuthReq id=0x1 user="fti/a7eHQUW" password=<hidden>]Nov 12 10:29:47 dyan pppd[1123]: rcvd [LCP EchoRep id=0x0 magic=0x0] Nov 12 10:29:47 dyan pppd[1123]: rcvd [PAP AuthAck id=0x1 ""] Nov 12 10:29:47 dyan pppd[1123]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]Nov 12 10:29:48 dyan pppd[1123]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]Nov 12 10:29:48 dyan pppd[1123]: rcvd [IPCP ConfReq id=0x1 <compress VJ 0f 01> <addr 193.252.253.1>]Nov 12 10:29:48 dyan pppd[1123]: sent [IPCP ConfAck id=0x1 <compress VJ 0f 01> <addr 193.252.253.1>]Nov 12 10:29:48 dyan pppd[1123]: rcvd [CCP ConfReq id=0x1 < 11 06 00 01 01 03>]Nov 12 10:29:48 dyan pppd[1123]: sent [CCP ConfRej id=0x1 < 11 06 00 01 01 03>]Nov 12 10:29:48 dyan pppd[1123]: rcvd [IPCP ConfNak id=0x1 <addr 193.248.33.17><ms-dns1 193.252.19.3> <ms-dns3 193.252.19.4>] Nov 12 10:29:48 dyan pppd[1123]: sent [IPCP ConfReq id=0x2 <addr 193.248.33.17> <compress VJ 0f 01> <ms-dns1 193.252.19.3> <ms-dns3 193.252.19.4>]Nov 12 10:29:48 dyan pppd[1123]: rcvd [CCP ConfRej id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]Nov 12 10:29:48 dyan pppd[1123]: sent [CCP ConfReq id=0x2] Nov 12 10:29:48 dyan pppd[1123]: rcvd [IPCP ConfAck id=0x2 <addr 193.248.33.17> <compress VJ 0f 01> <ms-dns1 193.252.19.3> <ms-dns3 193.252.19.4>]Nov 12 10:29:48 dyan pppd[1123]: Cannot determine ethernet address for proxy ARPNov 12 10:29:48 dyan pppd[1123]: local IP address 193.248.33.17Nov 12 10:29:48 dyan pppd[1123]: remote IP address 193.252.253.1 Nov 12 10:29:48 dyan pppd[1123]: primary DNS address 193.252.19.3 Nov 12 10:29:48 dyan pppd[1123]: secondary DNS address 193.252.19.4 Nov 12 10:29:48 dyan pppd[1123]: Script /etc/ppp/ip-up started (pid 1135) Nov 12 10:29:48 dyan pppd[1123]: rcvd [CCP ConfRej id=0x2] Nov 12 10:29:50 dyan pppd[1123]: Script /etc/ppp/ip-up finished (pid 1135), status = 0x0Nov 12 10:30:17 dyan pppd[1123]: sent [LCP EchoReq id=0x1 magic=0x34062020] Nov 12 10:30:17 dyan pppd[1123]: rcvd [LCP EchoRep id=0x1 magic=0x0] Nov 12 10:30:27 dyan pppd[1123]: Terminating on signal 15. Nov 12 10:30:27 dyan pppd[1123]: Script /etc/ppp/ip-down started (pid 1186) Nov 12 10:30:27 dyan pppd[1123]: sent [LCP TermReq id=0x2 "User request"] Nov 12 10:30:27 dyan pppd[1123]: Script /etc/ppp/ip-down finished (pid 1186), status = 0x0Nov 12 10:30:27 dyan pppd[1123]: rcvd [LCP TermAck id=0x2] Nov 12 10:30:27 dyan pppd[1123]: Connection terminated. Nov 12 10:30:27 dyan pppd[1123]: Connect time 0.8 minutes. Nov 12 10:30:27 dyan pppd[1123]: Sent 871 bytes, received 1880 bytes. Nov 12 10:30:27 dyan pppd[1123]: Hangup (SIGHUP) Nov 12 10:30:27 dyan pppd[1123]: Exit. Nov 12 10:30:45 dyan pppd[1201]: pppd 2.4.1 started by root, uid 0 Nov 12 10:31:15 dyan pppd[1201]: Serial connection established. Nov 12 10:31:15 dyan pppd[1201]: using channel 4 Nov 12 10:31:15 dyan pppd[1201]: Using interface ppp0 Nov 12 10:31:15 dyan pppd[1201]: Connect: ppp0 <--> /dev/ttyS1 Nov 12 10:31:16 dyan pppd[1201]: sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x60c98b7c> <pcomp> <accomp>]Nov 12 10:31:16 dyan pppd[1201]: rcvd [LCP ConfReq id=0x4c <asyncmap 0xa0000> <auth chap MD5> <magic 0x8cb1687a> <pcomp> <accomp>]Nov 12 10:31:16 dyan pppd[1201]: sent [LCP ConfNak id=0x4c <auth pap>] Nov 12 10:31:16 dyan pppd[1201]: rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x60c98b7c> <pcomp> <accomp>]Nov 12 10:31:16 dyan pppd[1201]: rcvd [LCP ConfReq id=0x4d <asyncmap 0xa0000> <auth pap> <magic 0x8cb1687a> <pcomp> <accomp>]Nov 12 10:31:16 dyan pppd[1201]: sent [LCP ConfAck id=0x4d <asyncmap 0xa0000> <auth pap> <magic 0x8cb1687a> <pcomp> <accomp>]Nov 12 10:31:16 dyan pppd[1201]: sent [LCP EchoReq id=0x0 magic=0x60c98b7c] Nov 12 10:31:16 dyan pppd[1201]: sent [PAP AuthReq id=0x1 user="fti/a7eHQUW" password=<hidden>]Nov 12 10:31:16 dyan pppd[1201]: rcvd [LCP EchoRep id=0x0 magic=0x8cb1687a] Nov 12 10:31:17 dyan pppd[1201]: rcvd [PAP AuthAck id=0x1 ""] Nov 12 10:31:17 dyan pppd[1201]: sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]Nov 12 10:31:17 dyan pppd[1201]: sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]Nov 12 10:31:17 dyan pppd[1201]: rcvd [IPCP ConfReq id=0xa3 <addr 193.251.96.33>]Nov 12 10:31:17 dyan pppd[1201]: sent [IPCP ConfAck id=0xa3 <addr 193.251.96.33>]Nov 12 10:31:17 dyan pppd[1201]: rcvd [LCP ProtRej id=0x4e 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f]Nov 12 10:31:17 dyan pppd[1201]: rcvd [IPCP ConfRej id=0x1 <compress VJ 0f 01>]Nov 12 10:31:17 dyan pppd[1201]: sent [IPCP ConfReq id=0x2 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]Nov 12 10:31:17 dyan pppd[1201]: rcvd [IPCP ConfNak id=0x2 <addr 80.9.91.245> <ms-dns1 193.252.19.3> <ms-dns3 193.252.19.4>]Nov 12 10:31:17 dyan pppd[1201]: sent [IPCP ConfReq id=0x3 <addr 80.9.91.245> <ms-dns1 193.252.19.3> <ms-dns3 193.252.19.4>]Nov 12 10:31:17 dyan pppd[1201]: rcvd [IPCP ConfAck id=0x3 <addr 80.9.91.245> <ms-dns1 193.252.19.3> <ms-dns3 193.252.19.4>]Nov 12 10:31:17 dyan pppd[1201]: Cannot determine ethernet address for proxy ARPNov 12 10:31:17 dyan pppd[1201]: local IP address 80.9.91.245Nov 12 10:31:17 dyan pppd[1201]: remote IP address 193.251.96.33 Nov 12 10:31:17 dyan pppd[1201]: primary DNS address 193.252.19.3 Nov 12 10:31:17 dyan pppd[1201]: secondary DNS address 193.252.19.4 Nov 12 10:31:17 dyan pppd[1201]: Script /etc/ppp/ip-up started (pid 1204) Nov 12 10:31:17 dyan pppd[1201]: Script /etc/ppp/ip-up finished (pid 1204), status = 0x0Nov 12 10:31:46 dyan pppd[1201]: sent [LCP EchoReq id=0x1 magic=0x60c98b7c] Nov 12 10:32:16 dyan pppd[1201]: sent [LCP EchoReq id=0x2 magic=0x60c98b7c] Nov 12 10:32:25 dyan pppd[1201]: Terminating on signal 15. Nov 12 10:32:25 dyan pppd[1201]: Script /etc/ppp/ip-down started (pid 1249) Nov 12 10:32:25 dyan pppd[1201]: sent [LCP TermReq id=0x2 "User request"] Nov 12 10:32:25 dyan pppd[1201]: Script /etc/ppp/ip-down finished (pid 1249), status = 0x0Nov 12 10:32:28 dyan pppd[1201]: sent [LCP TermReq id=0x3 "User request"] Nov 12 10:32:31 dyan pppd[1201]: Connection terminated. Nov 12 10:32:31 dyan pppd[1201]: Connect time 1.2 minutes. etc..... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
