Hi: I don't know whether this will help, but here goes.
I have a Gateway 700CX computer with SATA Maxtor drive 160 GB. I found the best way to install Debian on this was to get Knoppix 3.3 cd from Cheapbytes. It seemed to recognize the hard drive. I installed knoppix on the hard-drive using kns-hdinstall. I used debinstall to get install debian over the internet. Then I used the knoppix .config to make by own kernel 2.4.22 (with a few modifications) and now I have my own working kernel to suit my needs. I believe this will work for raid as well. I'll be happy to give you more details if you need them. Sebastian Canagaratna Department of Chemistry Ohio Northern University Ada, OH 45810 On Fri, Nov 07, 2003 at 04:01:43PM +0100, Franck Le Gall wrote: > > > Hello, > > I have look for the answer on the web but didn't find anything really > relevant. If I missed something, thanks to give me the link. > > Here is my question : I have a motherboard P4C800-E-DLX with the ICH5-R > chipset from intel. I have 2 SATA harddrives (80G Maxtor) mounted as raid 0 > using the ICH5-R (not the promise chipset). I would like to install debian > from scratch on them. > > I didn't find any kernel/install that includes the needed SATA + Raid > drivers. Do they exist ? If so, were ? > > I am quite desappointed not being able to install debian on my PC so any > help would be welcomed. > > Franck > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
