Hi, I can easily get my touchscreen to work, but I am a real nube and don't know how to make it stick. Every time I reboot I have to input the command below. You can see the return I get. So how do I make it boot up with the touchscreen? System is: jim@LinuxCNC:~$ uname -a Linux LinuxCNC 3.4-9-rtai-686-pae #1 SMP PREEMPT Debian 3.4.55-4linuxcnc i686 GNU/Linux jim@LinuxCNC:~$
root@LinuxCNC:/home/jim# sudo modprobe hid_multitouch root@LinuxCNC:/home/jim# tail -f /var/log/messages Feb 23 14:06:36 LinuxCNC kernel: [ 10.469122] r8169 0000:03:00.2: eth0: link down Feb 23 14:06:36 LinuxCNC kernel: [ 10.469346] ADDRCONF(NETDEV_UP): eth0: link is not ready Feb 23 14:06:36 LinuxCNC kernel: [ 10.472543] r8169 0000:03:00.2: eth0: link down Feb 23 14:06:36 LinuxCNC kernel: [ 10.614178] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input9 Feb 23 14:06:38 LinuxCNC kernel: [ 12.021539] r8169 0000:03:00.2: eth0: link up Feb 23 14:06:38 LinuxCNC kernel: [ 12.021703] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Feb 23 14:06:38 LinuxCNC kernel: [ 12.579580] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready Feb 23 14:17:04 LinuxCNC rsyslogd: [origin software="rsyslogd" swVersion="5.8.11" x-pid="2122" x-info="http://www.rsyslog.com";] rsyslogd was HUPed Feb 23 14:52:17 LinuxCNC kernel: [ 2747.276041] input: USBest Technology SiS HID Touch Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input10 Feb 23 14:52:17 LinuxCNC kernel: [ 2747.276367] hid-multitouch 0003:0457:1029.0001: input,hiddev0,hidraw2: USB HID v1.11 Device [USBest Technology SiS HID Touch Controller] on usb-0000:00:14.0-2/input0
