On 19/10/14 02:54, Marko Ranđelović wrote: > I use Wheezy on desktop computer. I use vesa driver for X because radeon is > not working. After pm-suspend command, computer is like turned off, when press > power button it wakes up, but not monitor and not keyboard. > > I tried --quirk-dpms-on, but didn't help.
What about these (together):- --quirk-dpms-suspend --quirk-dpms-on --quirk-vbestate-restore --quirk-vbemode-restore --quirk-vga-mode3 --quirk-vbe-post > I also tried kernel options noapic and irqpoll, but didn't help either. AFAIK they won't, unless the problem is a buggy BIOS > > lspci tells my VGA card as: > 01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI > Device 6613 Sapphire Radeon R7 240 ?? I've installed both the FOSS (radeon) and non-free (fglrx) driver for it in the past - so vesa would not be necessary. I had to install fglrx-driver and fglrx-control from testing at the time (over a year ago) - but the Wheezy or Wheezy backports packages should work fine. You'll need non-free repositories enabled in /etc/apt/sources.list. I'd previously installed the FOSS radeon driver (and found it too slow) which meant I had to blacklist that module to get the Closed Source driver working - from all reports the card still works very well. I included the fglrx-modules-dkms to get 3D-accellerated graphics. The process is documented here (though I used a different method):- https://wiki.debian.org/ATIProprietary#Debian_7_.22Wheezy.22 I'd suggest installing the proprietary driver unless you're happy with vesa - or, quite reasonably, reject closed source software (in which case you might have bought a less powerful card). NOTE: I've only dealt with suspend and that card when dkms was used. The FOSS radeon driver installation process is described here (a little dated?):- https://wiki.debian.org/AtiHowTo > > Kind regards > > A reference for Suspend is here (note that the information about dkms is out of date):- https://wiki.debian.org/Suspend A reference for debugging Suspend is here:- https://www.kernel.org/doc/Documentation/power/basic-pm-debugging.txt Questions:- Anything useful in /var/log/pm-suspend.log ?? What sort of keyboard ?? Is it a USB keyboard ?? Was Wheezy a fresh install or did you upgrade from Squeeze ?? What sort of desktop is it (make/model) - if a no-brand, what is the motherboard ?? Could you please paste your /var/log/Xorg.0.log somewhere e.g. paste.debian.net and post the link in your reply ?? HINT: pastebinit is a useful debian package for just that purpose Kind regards -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/544391fb.3080...@gmail.com
