Hi all,
just a new qustion for using 2.6.0-test9:
I want to use the i2c modules.
$ lsmod | grep i2c
i2c_dev 10112 - i2c_sensor 2688 - i2c_viapro 6668 - i2c_core 24516 -
$ grep -i sensor /usr/src/linux/.config
# I2C Hardware Sensors Chip support CONFIG_I2C_SENSOR=m CONFIG_SENSORS_ADM1021=m CONFIG_SENSORS_EEPROM=m CONFIG_SENSORS_IT87=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM78=m CONFIG_SENSORS_LM85=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_W83781D=m
Have you loaded any of the sensors modules? The modules for the sensors are called it87, eeprom, etc. Once you load these, you should see symlinks in /sys/bin/i2c/devices.
If you don't know which ones to load, you have a few choices: 1. Go back to 2.4, compile i2c and lm_sensors, load the i2c modules, and run /path/to/lm_sensors/prog/detect/sensors-detect
-or- 2. Look in the motherboard list at http://mbm.livewiredev.com/ (the link is near the top left).
-or- 3. Download and compile xmbmon from http://www.nt.phys.kyushu-u.ac.jp/shimizu/download/download.html Read the xmbmon readme, or try `mbmon -d -A'
-or- 4. Just try loading all the sensor modules and see what happens. I don't know if this will work...
-Corey
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
