I recently purchased an AverTV Studio card. I have installed it, and enabled the bttv driver. All seems well in dmesg
<snip> Linux video capture interface: v1.00 i2c-algo-bit.o: i2c bit algorithm module bttv: driver version 0.7.83 loaded bttv: using 2 buffers with 2080k (4160k total) for capture bttv: Host bridge is Silicon Integrated Systems [SiS] 735 Host bttv: Bt8xx card found (0). PCI: Found IRQ 11 for device 00:0f.0 PCI: Sharing IRQ 11 with 00:02.2 PCI: Sharing IRQ 11 with 00:0f.1 bttv0: Bt878 (rev 17) at 00:0f.0, irq: 11, latency: 64, memory: 0xcbdf e000 bttv0: detected: AVerMedia TVPhone98 [card=41], PCI subsystem ID is 14 61:0003 bttv0: using: BT878(AVerMedia TVPhone 98) [card=41,autodetected] i2c-core.o: adapter bt848 #0 registered as adapter 0. bttv0: Avermedia eeprom[0x4803]: tuner=2 bttv0: i2c: checking for MSP34xx @ 0x80... not found bttv0: i2c: checking for TDA9875 @ 0xb0... not found bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874a,tda9850,tda9855,tea630 0,tea6420,tda8425,pic16c54 (PV951) i2c-core.o: driver generic i2c audio driver registered. i2c-core.o: driver i2c TV tuner driver registered. tuner: chip found @ 0xc2 bttv0: i2c attach [client=Philips NTSC,ok] i2c-core.o: client [Philips NTSC] registered to adapter [bt848 #0](pos . 0). bttv0: PLL: 28636363 => 35468950 ... ok bttv0: PLL: switching off <snip> I open xawtv and get a TV picture, but no sound. I reboot into winblows and the card works fine, so I know all the cables are plugged into the right places. I checked the mixer and the volume levels are up, so I'm a little baffeled as to where to look now. I'm running Sid, KDE, with a sound blaster pci 128. The sound does work,although I noticed something that confuses me a little. in dmesg it shows <snip> es1370: version v0.37 time 10:28:23 Apr 14 2002 PCI: Found IRQ 11 for device 00:11.0 PCI: Sharing IRQ 11 with 00:0b.0 es1370: found adapter at io 0xd400 irq 11 es1370: features: joystick off, line in, mic impedance 0 <snip> it seems that the sound card and AverTV card are sharing the same irq, but also looking at the features it shows the joystick port being off, where is that configured?....could my line-in jack not enabled? any thoughts or insight would be helpful nick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
