On 1/8/14, Ralf Mardorf <ralf.mard...@alice-dsl.net> wrote: > On Mon, 2014-01-06 at 07:48 -0500, Long Wind wrote: >> knoppix CD doesn't seem to be able to boot > On Thu, 2014-01-09 at 09:23 +0800, Long Wind wrote: >> I'v try Knoppix, it can't run, I make no progress > > What does it mean? You put the Knoppix CD/DVD into the drive and then > doesn't happen anything? Or does it start to boot and then doesn't > finish the boot process? If it does start booting, at what point does it > stop booting? Linux does show messages during the boot process and we > ask you several times to post those messages. We also told you what to > do, if you should see a picture instead of messages, then you need to > push the Esc-key or one of the F-Keys. Try one key after the other until > you see messages. >
I have attached a photo of screen in email the photo isn't very clear, hopefully you can see it > You could start troubleshooting by posting at least the last complete > message before booting stops. > > On Thu, 2014-01-09 at 09:33 +0800, Long Wind wrote: >> today I plug the disk with woody to a P4/1.6G PC >> it can't boot though it can boot a P4/2.9G PC > > You put another CPU into the same motherboard? You used another PC with > another motherboard with another chip set, graphics etc.? > no, I don't change CPU, it's another motherboard >> error msg are mainly about CPU > > Is it a guessing game? Post the original complete error messages you > get. The "mainly about CPU" and the few others too. > > I am not sure whether error msg is logged I am too tired of the problem -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/cab-gxzdarstq-gyvqgw45ef1gz4la3bval0bbwu7x59on48...@mail.gmail.com
