On Fri, 24 Oct 2003 22:56:57 +0200, Kjetil Kjernsmo wrote: [...] > > When I boot up, I get kernel messages rolling along, but stops with the > following line: > PCI: PCI BIOS revision 2.10 entry at 0xf0d40, last bus=1 then, the LED on > the floppy drive lights up and remain lit, and then it just sits there. > Nothing happens, I and have to push the reset button to reboot. It doesn't > tell me it's panicked either. > > I find the same line in my 2.4.22 dmesg. What follows after booting 2.4.22 > is this: > PCI: PCI BIOS revision 2.10 entry at 0xf0d40, last bus=1 PCI: Using > configuration type 1 > PCI: Probing PCI hardware > PCI: Probing PCI hardware (bus 00) > PCI: Using IRQ router VIA [1106/0686] at 00:04.0 PCI: Disabling Via > external APIC routing Linux NET4.0 for Linux 2.4 [...]
Hi, had some PCI problems with 2.6, too. I were able to solve them by disabling ACPI (partially or generally). You do not have to compile a new kernel for this, just try to append one of the following options in the boot prompt (edit lilo.conf or menu.list (grub)): pci=noacpi pci=biosirq acpi=off For me, test3 worked without any options, test4 required pci=noacpi and test5 would not work until I diabled ACPI (acpi=off). Now I have test7 and it works with pci=noacpi. Greetings Andre -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
