On 10/27/2013 1:18 PM, Martin T wrote: > lspci utility shows information regarding devices on various buses like PCI > or PCI Express. For example on IBM ThinkPad T42 laptop: [snip]
> Am I correct that lspci uses SMBus which is present both on PCI and PCI > Express? In addition, how are the model numbers detected? SMBUS is not required. Once the PCI driver loads it scans all devices on the PCI bus or host bridge controller, collecting the PCI device vendor/model data during this enumeration process, along with programming/initializing each device, and then populates /sys/bus/pci/devices/0000:00:xx.x/vendor /sys/bus/pci/devices/0000:00:xx.x/device which are read by lspci. > For example Intel > Corporation PRO/Wireless 2915ABG Wi-Fi adapter. Is there a small > non-volatile memory on each device which stores information about > particular hardware device? No, these IDs are hard coded in PCI device registers, which is why each ID is exactly 4 bytes in length. PCI ID is part of the PCI standard, part of the PCI Configuration Space. lspci cross references the vendor and device IDs in /sys/bus/pci/../ with the PCI ID table to give you the detailed device information. See: http://pciids.sourceforge.net/ Example: http://pci-ids.ucw.cz/read/PC/8086 -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/526d641a.1060...@hardwarefreak.com
