Hello
[loonyx | rolf joho] (<[EMAIL PROTECTED]>) wrote:
even though i load the ide-scsi module at boottime, i can not mount my ide-dvd-writer. since i was perfectly able to do that on earlier installations, i am asking for hints.
through /etc/modules i successfully load this: sr_mod ide-scsi my complete lsmod can be found at the end of the message.
my bootloader (grub) has this entry (which worked on older setups): kernel /vmlinuz-2.4.18-smp-woody-xas-1.0-i686 video=matrox:vesa:440 ro root=/dev/sda6 idebus=66 hdc=ide-scsi
when i try to mount a cdrom i get this (even as root): [EMAIL PROTECTED]:rolf]# mount -t iso9660 -o ro /dev/scd0 /cdrom mount: /dev/scd0 is not a valid block device
i tried other devices like scd1... sg0... no success.
What do /proc/scsi/scsi and dmesg say about your drive?
best regards Andreas Janssen
actually nothing (the last entry is my scanner and scs1 is not used): Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: QUANTUM Model: ATLAS IV 9 WLS Rev: 0707 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: SEAGATE Model: ST39140W Rev: 1444 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: SEAGATE Model: ST39140W Rev: 1444 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 04 Lun: 00 Vendor: iomega Model: jaz 2GB Rev: E.17 Type: Direct-Access ANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 06 Lun: 00 Vendor: HP Model: C1750A Rev: 3125 Type: Processor ANSI SCSI revision: 01
rolf
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
