I need some extra eyes and advice for this problem I'm having. I've got
a usb 250 zip drive that I've installed debian on. I've been using an
initrd ramdisk to boot from that uses kernel 2.4.20. The boot process
goes fine. The problem is, there are 2 strange processes that continue
after boot. One of them is writing to all the log files filling up the
disk.
Booting into another partition (on an ide drive) I can mount this drive
and none of these problems occur. Does anyone know how to fix this or
what that process is looking/waiting for?
// logs and processes //
PROCESSES:
root 15 0.0 0.0 0 0 ? SW 02:46 0:00
[usb-storage-0]
root 16 0.0 0.0 0 0 ? SW 02:46 0:00
[scsi_eh_1]
USBFS IS MOUNTED
/proc/bus/usb
devices:
*--snip--*
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=059b ProdID=0030 Rev= 1.00
S: Manufacturer=Iomega
S: Product=USB Zip 250
S: SerialNumber=059B00300D006248
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=32ms
drivers:
usbdevfs
hub
96-111: hiddev
hid
serial
usb-storage
LOOPING OUTPUT IN SYSLOG:
--
Oct 21 22:44:22 wakizashi kernel: usb-storage: queuecommand() called
Oct 21 22:44:22 wakizashi kernel: usb-storage: *** thread awakened.
Oct 21 22:44:22 wakizashi kernel: usb-storage: Command READ_10 (10
bytes)
Oct 21 22:44:22 wakizashi kernel: usb-storage: 28 00 00 03 aa 78 00 00
04 00 00 00
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk command S 0x43425355
T 0x1516 Trg 0 LUN 0 L 2048 F 128 CL 10
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk command transfer
result=0
Oct 21 22:44:22 wakizashi kernel: usb-storage:
usb_stor_transfer_partial(): xfer 2048 bytes
Oct 21 22:44:22 wakizashi kernel: usb-storage: usb_stor_bulk_msg()
returned 0 xferred 2048/2048
Oct 21 22:44:22 wakizashi kernel: usb-storage:
usb_stor_transfer_partial(): transfer complete
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk data transfer result
0x0
Oct 21 22:44:22 wakizashi kernel: usb-storage: Attempting to get CSW...
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk status result = 0
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk status Sig
0x53425355 T 0x1516 R 0 Stat 0x0
Oct 21 22:44:22 wakizashi kernel: usb-storage: scsi cmd done, result=0x0
Oct 21 22:44:22 wakizashi kernel: usb-storage: *** thread sleeping.
Oct 21 22:44:22 wakizashi kernel: usb-storage: queuecommand() called
Oct 21 22:44:22 wakizashi kernel: usb-storage: *** thread awakened.
Oct 21 22:44:22 wakizashi kernel: usb-storage: Command READ_10 (10
bytes)
Oct 21 22:44:22 wakizashi kernel: usb-storage: 28 00 00 03 aa 9c 00 00
02 00 00 00
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk command S 0x43425355
T 0x1517 Trg 0 LUN 0 L 1024 F 128 CL 10
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk command transfer
result=0
Oct 21 22:44:22 wakizashi kernel: usb-storage:
usb_stor_transfer_partial(): xfer 1024 bytes
Oct 21 22:44:22 wakizashi kernel: usb-storage: usb_stor_bulk_msg()
returned 0 xferred 1024/1024
Oct 21 22:44:22 wakizashi kernel: usb-storage:
usb_stor_transfer_partial(): transfer complete
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk data transfer result
0x0
Oct 21 22:44:22 wakizashi kernel: usb-storage: Attempting to get CSW...
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk status result = 0
Oct 21 22:44:22 wakizashi kernel: usb-storage: Bulk status Sig
0x53425355 T 0x1517 R 0 Stat 0x0
Oct 21 22:44:22 wakizashi kernel: usb-storage: scsi cmd done, result=0x0
Oct 21 22:44:22 wakizashi kernel: usb-storage: *** thread sleeping.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
