On 21/04/13 01:11 PM, R. Ramesh wrote:
I have a mdadm implemented raid5 with 3 disks (2x 3TiB and 1x 2TiB).
Each disk has one partition only for the full size of that disk and
the partitions are then combined in to md0.
I like to swap out the 2TiB with a new 3TiB. While I do not expect
issue with this, a lot of reading about unrecoverable errors spooked
me a little on the rebuild/resync. Further, I think it is silly that
we need to read all the disks in the original array as part of resync
(in a fail+remove+add method of changing disks) Is there a way to
avoid resync by doing a dd from 2TB on to the *new* 3TB and then
reassembling the array? I mean this
1. shutdown
2. add 3tb to the PC
3. boot using rescue disk and do not assemble the md0.
4. Copy partition table from one of old 3TiB on to the *new* 3TiB
5. dd 2TiB-part1 to *new* 3TiB-part1
6. shutdown
7. disconnect 2TiB disk
8. restart to original OS on the disk to find the 3TiB as part of the
reassemble
9. Grow the array to full size
Since the above is not suggested anywhere I could find, I like to know
what I am missing as this seems too easy to me.
Ramesh
The problem is the location of the superblocks. If you're prepared to
have your system shut down for a while to copy the data, I suggest that
you simply remove the 2T disk and add the 3T disk. You will still have
your 2T disk so if something fails, you should be able to recover using it.
This of course means that you cannot be using your system. The md array
cannot be written to or the 2T drive will no longer be usable. So boot
from a rescue disk and rebuild the array without mounting it or any
partition on it until the rebuild has completed.
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/5174ad17.8050...@rogers.com
