Hi,
I have a SanDisk 16GB card
(http://www.play.com/Electronics/Electronics/-/3184/2451/-/30026998/SanDisk-Ultra-16GB-SDHC-Memory-Card/Product.html),
once insert it into the slot, it showed me:
Jul 26 12:41:47 debian kernel: [94880.765117] mmc0: Resetting controller.
Jul 26 12:41:47 debian kernel: [94880.783153] mmc0: Card removed
during transfer!
Jul 26 12:41:47 debian kernel: [94880.783163] mmc0: Resetting controller.
Jul 26 12:41:47 debian kernel: [94880.787329] mmc0: error -123 whilst
initialising SD card
Jul 26 12:42:31 debian kernel: [94924.588304] sdhci: Switching to 1.8V
signalling voltage failed, retrying with S18R set to 0
Jul 26 12:42:39 debian kernel: [94932.607544] mmc0: error -110 whilst
initialising SD card
Jul 26 12:42:48 debian kernel: [94941.003529] mmc0: error -110 whilst
initialising SD card
Jul 26 12:42:48 debian kernel: [94941.831354] sdhci: Switching to 1.8V
signalling voltage failed, retrying with S18R set to 0
Jul 26 12:42:56 debian kernel: [94949.919027] mmc0: error -110 whilst
initialising SD card
Jul 26 12:43:13 debian kernel: [94966.303499] mmc0: error -110 whilst
initialising SD card
dmesg results showed me:
[94880.783163] mmc0: Resetting controller.
[94880.787329] mmc0: error -123 whilst initialising SD card
[94924.588304] sdhci: Switching to 1.8V signalling voltage failed,
retrying with S18R set to 0
[94932.607544] mmc0: error -110 whilst initialising SD card
[94941.003529] mmc0: error -110 whilst initialising SD card
[94941.831354] sdhci: Switching to 1.8V signalling voltage failed,
retrying with S18R set to 0
[94949.919027] mmc0: error -110 whilst initialising SD card
[94966.303499] mmc0: error -110 whilst initialising SD card
The card is healthy, I have a USB card reader, so no problem,
[95739.464470] usb 2-1.2: new full-speed USB device number 6 using ehci_hcd
[95739.480565] hub 2-1:1.0: unable to enumerate USB device on port 2
[95739.720215] usb 2-1.2: new high-speed USB device number 7 using ehci_hcd
[95739.813751] usb 2-1.2: New USB device found, idVendor=14cd, idProduct=125c
[95739.813761] usb 2-1.2: New USB device strings: Mfr=1, Product=3,
SerialNumber=2
[95739.813767] usb 2-1.2: Product: Mass Storage Device
[95739.813772] usb 2-1.2: Manufacturer: Generic
[95739.813776] usb 2-1.2: SerialNumber: 125C20100726
[95739.814603] scsi4 : usb-storage 2-1.2:1.0
[95740.812191] scsi 4:0:0:0: Direct-Access Mass Storage Device
PQ: 0 ANSI: 0 CCS
[95740.816024] sd 4:0:0:0: [sdb] 31116288 512-byte logical blocks:
(15.9 GB/14.8 GiB)
[95740.816702] sd 4:0:0:0: [sdb] Write Protect is off
[95740.816712] sd 4:0:0:0: [sdb] Mode Sense: 03 00 00 00
[95740.817368] sd 4:0:0:0: [sdb] No Caching mode page present
[95740.817381] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[95740.820973] sd 4:0:0:0: [sdb] No Caching mode page present
[95740.820985] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[95740.822154] sdb: sdb1
[95740.824325] sd 4:0:0:0: [sdb] No Caching mode page present
[95740.824328] sd 4:0:0:0: [sdb] Assuming drive cache: write through
[95740.824330] sd 4:0:0:0: [sdb] Attached SCSI removable disk
I wonder, is it possible to read without the card reader.
Thanks with best regards,
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/CAG9cJm=mprxy01sji3tots4rj3xsiv-xn1hzmnzd44rkp+4...@mail.gmail.com
