Hi debian folks,
I installed Debian last week (for the first time), and things
generally went very nicely.
One thing which isn't yet working though is sound. I'm currently
using the kernel from debian-backports
(linux-image-3.2.0-0.bpo.2-amd64) in order to get my ethernet
working, but the same thing happenned with the stock 2.6 kernel too
(linux-image-2.6.32-5-amd64)
Any suggestions at all of things to try would be most appreciated.
Below is hopefully relevant output from interesting commands.
Many thanks,
Nick
'alsactl init' returns the following:
Unknown hardware: "HDA-Intel" "Realtek ALC887-VD"
"HDA:10ec0887,1458a002,00100302" "0x1458" "0xa002"
Hardware is initialized using a guess method
/usr/share/alsa/init/default:26: control element not found
/usr/share/alsa/init/default:26: control element not found
/usr/share/alsa/init/default:41: control element not found
'alsamixer' fails with:
cannot load mixer controls: Invalid argument
the relevant part of 'lspci -knnvv':
00:1b.0 Audio device [0403]: Intel Corporation Cougar Point High Definition
Audio Controller [8086:1c20] (rev 04)
Subsystem: Giga-byte Technology Device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0300c Data: 4171
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns,
L1 <1us
ExtTag- RBE- FLReset+
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
L0 <64ns, L1 <1us
ClockPM- Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=22
Status: NegoPending- InProgress-
Capabilities: [130 v1] Root Complex Link
Desc: PortNumber=0f ComponentID=00 EltType=Config
Link0: Desc: TargetPort=00 TargetComponent=00 AssocRCRB-
LinkType=MemMapped LinkValid+
Addr: 00000000fed1c000
Kernel driver in use: snd_hda_intel
'lsmod|grep snd' output:
snd_hda_codec_realtek 188417 1
snd_hda_intel 26023 0
snd_hda_codec 81579 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 13148 1 snd_hda_codec
snd_pcm 67465 2 snd_hda_intel,snd_hda_codec
snd_seq 44678 0
snd_timer 22658 2 snd_pcm,snd_seq
snd_seq_device 13155 1 snd_seq
snd 52458 8
snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,
snd_timer,snd_seq_device
soundcore 13014 1 snd
snd_page_alloc 12969 2 snd_hda_intel,snd_pcm
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: http://lists.debian.org/20120402094905.GB1785@starfish
