On Sun, 25 Dec 2011 11:17:57 +0200, David Baron wrote: > [ 3527.898202] CPU1: Core temperature above threshold, cpu clock throttled > (total events = 25957) > [ 3527.898226] CPU0: Core temperature above threshold, cpu clock throttled > (total events = 25959) > [ 3527.899235] CPU1: Core temperature/speed normal > [ 3527.899243] CPU0: Core temperature/speed normal
These messages can be annoying but normal: [PATCH] x86/mcheck/therm_throt.c: Don't log power limit and package level thermal throttle event in mce log https://lkml.org/lkml/2011/11/14/239 > My sensors system is not working for temperature: > ~$ sensors > it8712-isa-0290 > Adapter: ISA adapter > VCore 1: +1.38 V (min = +0.00 V, max = +4.08 V) > VCore 2: +2.78 V (min = +0.00 V, max = +4.08 V) > +3.3V: +3.31 V (min = +0.00 V, max = +4.08 V) > +5V: +4.92 V (min = +0.00 V, max = +6.85 V) > +12V: +12.16 V (min = +0.00 V, max = +16.32 V) > -12V: -16.93 V (min = -27.36 V, max = +3.93 V) > -5V: -5.12 V (min = -13.64 V, max = +4.03 V) > Stdby: +4.97 V (min = +0.00 V, max = +6.85 V) > VBat: +4.08 V > fan1: 0 RPM (min = 0 RPM) > fan2: 0 RPM (min = 0 RPM) > fan3: 0 RPM (min = 0 RPM) > M/B Temp: -128.0°C (low = -1.0°C, high = +127.0°C) sensor = disabled > CPU Temp: -128.0°C (low = -1.0°C, high = +127.0°C) sensor = disabled > Temp3: -128.0°C (low = -1.0°C, high = +127.0°C) sensor = disabled > intrusion0: OK > > I would not mind getting to work but I believe some BIOS defaults are > problematic. However, I can be very very sure that the thing is not > running too hot right now! That can be a differenet issue. If you have installed lm-sensors package and what to use it, you will have to configure to detect your systems values properly. Depending on your motherboard chipset it will be easier or hard to achieve. I would start by reading lm-sensors manual, Debian docs and online documentation :-) > How do I get rid of these "events?" Those events are fine, you should not worry unless you notice your system runs very very hot and BIOS is displaying CPU/system temps values at high levels... > (I am running a 32-bit Sid with the amd64 RC4 kernel right now but see > these with others as well.) Hum... that can explain the warnings showed at the log. The next kernel update that integrates the above-mentioned patch may hide the messages. Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.12.28.18.35...@gmail.com
