On Wed, 12 Oct 2011 12:08:30 +0200, Bonno Bloksma wrote: (..)
> 1) > Can I simply run a new cfgmaker command restart mrtg and be done? If so, > there is no mrtg script in /etc/init.d/ so how do I restart mrtg. If the package has been already configured and setup I'd say you only will have to generate the new config file (save a backup for the older, just in case). What you may need to restart/reload is "snmpd" service :-? > 2) > Does anyone know if all Procurve switches with recent firmware support > SNMP v2? If not, where might I find that information? > I would like to use the option --snmp-options :::::2 to force the use of > snmp v2 on all switches. For the few that do not support v2 I might then > specify v1. For this one I can't tell. I suppose it will depend on the exact Procurve device you have in your hands... You can query HP switches database from here: http://h17007.www1.hp.com/us/en/products/switches/index.aspx Choose the series it belongs to, then your model and look for its technical specifications. SNMPv1 should follow RFC 1213 while SNMPv2 should appears as RFC 1901 and/or RFC 1908 (additional info on the corresponding RFC's can be found here¹). ¹http://en.wikipedia.org/wiki/Simple_Network_Management_Protocol Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/pan.2011.10.12.16.45...@gmail.com
