On Mon, 2003-09-29 at 20:56, uGAH man wrote: > Micha Feigin wrote: > > > On Mon, 2003-09-29 at 05:54, devotion wrote: > > > >> Hi. [snip] > When I run dmesg|grep -n -B 3 -A 3 eth , i get: > Kernel 2.2: > 53-3c59x.c 18Feb01 Donald Becker and others > http://www.scyld.com/network/vortex.html > 54-pcnet32.c: PCI bios is present, checking for devices... > 55-rtl8139.c:v1.07 5/6/99 Donald Becker > http://cesdis.gsfc.nasa.gov/linux/drivers/rtl8139.html > 56:eth0: RealTek RTL8139 Fast Ethernet at 0xb800, IRQ 10, 00:e0:7d:c8:12:93. > 57-via-rhine.c:v1.08b-LK1.0.1 12/14/2000 Written by Donald Becker > 58- http://www.scyld.com/network/via-rhine.html > 66:eth1: 8139too Fast Ethernet driver 0.9.18-pre4 Jeff Garzik > <[EMAIL PROTECTED]> > 67:eth1: Linux-2.2 bug reports to Jens David <[EMAIL PROTECTED]> > 68:eth1: RealTek RTL8139 Fast Ethernet board found at 0xd004d000, IRQ 10 > 69:eth1: Chip is 'RTL-8139C' - MAC address '00:e0:7d:c8:12:93'. > 70-CSLIP: code copyright 1989 Regents of the University of California > 71-PPP: version 2.3.7 (demand dialling) > 72-PPP line discipline registered. > 74-PPP BSD Compression module registered > 75-PPP Deflate Compression module registered > 76:eth1: Setting half-duplex based on auto-negotiated partner ability 0000. > 77-registered device ppp0 > 78-probable hardware bug: clock timer configuration lost - probably a > VIA686a. > 79-probable hardware bug: restoring chip configuration. > -- > 81-device ppp0 left promiscuous mode > 82-device ppp0 entered promiscuous mode > 83-device ppp0 left promiscuous mode > 84:eth1: Promiscuous mode enabled. > 85:device eth1 entered promiscuous mode > 86:device eth1 left promiscuous mode > 87:device eth0 entered promiscuous mode > 88:device eth0 left promiscuous mode > 89-device ppp0 entered promiscuous mode > 90-device ppp0 left promiscuous mode > > Kernel 2.4: > ike:/home/ugah# dmesg | grep -n -B 3 -A 3 eth > 78-Adding Swap: 514100k swap-space (priority -1) > 79-8139too Fast Ethernet driver 1.6.0 loaded > 80-PCI: Found IRQ 10 for device 00:09.0# > 81:eth0: use memory map. ioaddr=0xd086e000 > 82:eth0: Identified 8139CP chip type 'RTL-8139C' > 83:eth0: RealTek RTL8139CP Fast Ethernet at 0xd086e000, > 00:e0:7d:c8:12:93, IRQ 10 > 84-NTFS driver v1.1.22 [Flags: R/O MODULE] > 85-CSLIP: code copyright 1989 Regents of the University of California > 86-PPP generic driver version 2.4.2 > -- > 93-PPP Deflate Compression module registered > 94-usb.c: registered new driver usblp > 95-printer.c: v0.11: USB Printer Device Class driver > 96:eth0: Setting half-duplex based on auto-negotiated partner ability 0000.
Looks like the 2.4 kernel isn't seeing eth1 at boot time, and that's odd. How about "/sbin/lspci" (which is more compact than 'cat /proc/pci')? -- ----------------------------------------------------------------- Ron Johnson, Jr. [EMAIL PROTECTED] Jefferson, LA USA "Experience hath shewn, that even under the best forms [of government] those entrusted with power have, in time, and by slow operations, perverted it into tyranny." Thomas Jefferson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
