> Have you tried # parted -l, fdisk works with cylinders. > here's the parted output:
Model: ATA WDC WD7500BPKT-6 (scsi) Disk /dev/sda: 750GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 53.7GB 53.7GB primary ntfs boot 2 53.7GB 54.8GB 1074MB primary ext4 3 54.8GB 592GB 537GB primary 4 592GB 750GB 159GB extended 5 592GB 750GB 159GB logical ntfs Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/vg_hostname-lv_vm: 107GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 107GB 107GB ext4 Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/vg_hostname-lv_swap: 4094MB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 4094MB 4094MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/vg_hostname-lv_home: 51.2GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 51.2GB 51.2GB ext4 Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/vg_hostname-lv_root: 20.5GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags 1 0.00B 20.5GB 20.5GB ext4 Error: /dev/mapper/sda3_crypt: unrecognised disk label Warning: Unable to open /dev/sr1 read-write (Read-only file system). /dev/sr1 has been opened read-only. Warning: The driver descriptor says the physical block size is 512 bytes, but Linux says it is 2048 bytes. Ignore/Cancel? ---------------------------------- not sure what that error means. I am guessing it's got something to do with the LUKS partition. If I type Ignore, It says Error: Can't have a partition outside the disk! ??? -- Kind regards, Yudi
