Hello, I have two scsi discs in a raid1 setup:
md1: sda1 and sdb1 md2: sda2 and sdb2 Filesystem Size Used Avail Use% Mounted on /dev/md2 880M 452M 384M 55% / /dev/md1 13M 2.7M 10M 21% /boot The systems boots fine when sda or both disks are attached. When sda is not attached the raid doesn't boot from sdb. I get LI 01 01 01 01 01... When I boot from floppy with only the second disk attached everything works ok. schamper:/home/rudy# cat /etc/lilo.conf lba32 boot=/dev/md1 raid-extra-boot=/dev/sda,/dev/sdb root=/dev/md2 install=/boot/boot.b map=/boot/map vga=normal delay=20 image=/vmlinuz label = Linux read-only I used mdadm to setup the raid and have raid support compiled into the kernel (NOT as module). What did I do wrong in my lilo.conf? Thank you ever so much. -- Rudy Gevaert [EMAIL PROTECTED] Web page http://www.webworm.org GNU/Linux user and Savannah hacker http://savannah.gnu.org "Many that live deserve death. And some that die deserve life. Can you give it to them? Then do not be to eager to deal out death in judgement." - Gandalf, Lord of the Rings (J R R Tolkien) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
