After upgrading to squeeze from lenny I cannot copy photos from the
8GB memory card. Worse: the computer freezes, I lose the mouse and
the keyboard (attached via USB) and have to make hard-shutdown.
I can mount the file-system, but very quickly it will appear as if it
was never mounted: cd, ls, etc., will not work.
So far using same camera and connection with another card didn't
produce that effect.
Using both cards, same camera and connection, on another machine +
lenny doesn't produce this effect either.
Below is the relevant part of /var/log/messages showing the detection
of the camera with a 4GB card, followed by the detection of the
tricksey 8GB card. The last line belongs to the boot sequence that I
was forced to do.
Please help me to resolve this issue.
Thanks,
Itay
<begin: /var/log/messages>
[264415.556019] usb 2-4: new high speed USB device using ehci_hcd and address 3
[264415.689635] usb 2-4: New USB device found, idVendor=04b0, idProduct=0419
[264415.689638] usb 2-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[264415.689641] usb 2-4: Product: NIKON DSC D300
[264415.689643] usb 2-4: Manufacturer: NIKON
[264415.689644] usb 2-4: SerialNumber: 000003103000
[264415.689747] usb 2-4: configuration #1 chosen from 1 choice
[264415.689995] scsi9 : SCSI emulation for USB Mass Storage devices
[264420.690039] scsi 9:0:0:0: Direct-Access NIKON D300 1.00 PQ: 0
ANSI: 2
[264420.690605] sd 9:0:0:0: Attached scsi generic sg5 type 0
[264420.691392] sd 9:0:0:0: [sdc] 8027712 512-byte logical blocks: (4.11
GB/3.82 GiB)
[264420.691763] sd 9:0:0:0: [sdc] Write Protect is off
[264420.693641] sdc: sdc1
[264420.696766] sd 9:0:0:0: [sdc] Attached SCSI removable disk
[264870.768022] usb 2-4: reset high speed USB device using ehci_hcd and address
3
[264871.016021] usb 2-4: reset high speed USB device using ehci_hcd and address
3
[264975.886655] usb 2-4: USB disconnect, address 3
[265094.536019] usb 1-4: new high speed USB device using ehci_hcd and address 4
[265094.669478] usb 1-4: New USB device found, idVendor=04b0, idProduct=0419
[265094.669481] usb 1-4: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[265094.669483] usb 1-4: Product: NIKON DSC D300
[265094.669485] usb 1-4: Manufacturer: NIKON
[265094.669487] usb 1-4: SerialNumber: 000003103000
[265094.669590] usb 1-4: configuration #1 chosen from 1 choice
[265094.669872] scsi10 : SCSI emulation for USB Mass Storage devices
[265099.669888] scsi 10:0:0:0: Direct-Access NIKON D300 1.00 PQ: 0
ANSI: 2
[265099.670463] sd 10:0:0:0: Attached scsi generic sg5 type 0
[265099.671363] sd 10:0:0:0: [sdc] 16007040 512-byte logical blocks: (8.19
GB/7.63 GiB)
[265099.671730] sd 10:0:0:0: [sdc] Write Protect is off
[265099.673741] sdc: sdc1
[265099.678379] sd 10:0:0:0: [sdc] Attached SCSI removable disk
imklog 4.6.4, log source = /proc/kmsg started.
<end: /var/log/messages>
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
http://lists.debian.org/alpine.DEB.2.00.1108122203440.2888@gandalf.furmanet
