steef wrote: > for years (from potato/woody on) i have mounted 3 hd' s in my > machine (independently installed from each other with debian, > somtimes slackware and/or gentoo) from one specific hd with/after > the command #mkdir /mnt/sdx, mnt/sdy etc. and in fstab /dev/sdx > /mnt/sdx ext3 user 0 0 && (to keep it simple). on each hd i had a > bootloader (lilo and later grub) installed. > > with grub2 as bootloader under squeeze i cannot mount other hd's > anymore when independently on the *other* hd' s a bootloader (grub2) > in the mbr is installed. without installing grub2 in the mbr of a > sata-hd the hd on which i am mounting *does* recognize the other hd > *with the exception of (old) ata hd's. > > my question: what do i miss if anything? or is this normal for the > new grub? is there anything to do about this? has this got to do > with UUID-numbers?
I imagine the problem you can't directly boot the other system's anymore is that the version differences between the stage1 and stage2 loaders have grown enough that they are no longer compatible. But I don't know and that is just a guess. You could try chainbooting the other bootloader. That is how grub boot's "alien" bootloaders (such as MS) and I assume would work with different versions of grub and lilo too. But I admit I haven't tried it. And in fact I looked but couldn't find an example machine that I could log into that had such a configuration. (Not much MS in use here. :-) But according to the docs and my memory something like this should work: title Some Alien OS Here rootnoverify (hd0,0) makeactive chainloader +1 You would of course change (hd0,0) to match your actual disk and partition location that you want to boot. You should be able to test this by interactively entering those at the grub command line at boot time. That would allow you to perform this test without changing anything. Just stop the boot process at the grub menu and then enter the command line and perform those commands manually following the menu instructions. Since I wasn't able to try the above if anyone has any corrections to the process that would be most welcome. Bob
signature.asc
Description: Digital signature
