Thanks again to those who have offered great advice on getting 2.6.0-test2 up and running. I have a bootable system, got sound working with relatively little trouble,so I'm continuing to work down myproblem list.
Would appreciate thoughts on two more problems: 1) modconf doesn't find any modules. It just comes up with an empty menu,with the only choice being "exit." I understood that modconf used the output of uname to find the appropriate tree in /lib/modules, and since that tree is where it should be, I am stumped. I do have the new module-init-toosl installed, and I can install modules just fine. 2) Shutdown: as far as I can tell, the USB layer is trouble. In booting up, I get a ton of usb related errors - no specifics yet, I'm trying to narrow down where these are coming from first. However, on shutdown, while dconfiguring the usb devices, the shutdown hangs and never completes, so I just have to hard-reset the machine. I ran into this a long time ago on an early 2.4 series kernel on an ASUS CUSL-2/Pentium III system, and never figured out the problem. Wondered if anyone else is seeing somehting similar. For reference, the only USB device hooked up is an external Belkin hub and a generic USB memory card reader (that handles CF, SM, etc). The reader always worked fine under 2.4.x with the usb-storage module. I actually haven't testing it yet to see if it reads cards under 2.6.0. Thanks. nl -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
