30/11/2010 06:47, Marc Shapiro wrote: > On 11/29/10 16:52, Rob Owens wrote: >> On Sun, Nov 28, 2010 at 09:31:10PM -0800, Marc Shapiro wrote: >>> First off, I'm a video editing newbie. Not a linux newbie. I've been >>> running Debian since Bo. >>> >>> I have a lot of video tapes lying around and I am afraid they will >>> degrade over time. Also, since they are not making tapes any more (or >>> VCRs?) I expect it will be difficult to repair my two VCRs when they >>> start to die on me. So I want to convert my analog tapes to digital >>> files while I can and write them out to DVD. >>> >>> When I mentioned this to a friend, he pulled out a WinTV card, using a >>> Hauppauge PVR-250. Are there drivers for this in the standard kernel >>> tree, or do I need to get them from somewhere? >>> >> This works in Lenny and is auto-detected. > > Well, I have installed the card, but it is not initializing correctly. > For one thing, in appears to be a PVR-150 (not PVR-250). These appear > to be the pertinent output sections of dmesg showing that, and also > showing what looks like a successful initialization and an unsuccessful > loading of firmware at the very end: > > --------------------------------------------------------------------- > [ 10.496469] Linux video capture interface: v2.00 > [ 10.778863] ivtv: Start initialization, version 1.4.1 > [ 10.779040] ivtv0: Initializing card 0 > [ 10.779091] ivtv0: Autodetected Hauppauge card (cx23416 based) > [ 10.808083] ivtv 0000:00:08.0: PCI INT A -> GSI 18 (level, low) -> > IRQ 18 > [ 10.880224] tveeprom 0-0050: Hauppauge model 26032, rev C199, serial# > 8164408 > [ 10.880283] tveeprom 0-0050: tuner model is TCL 2002N 5H (idx 99, > type 50) > [ 10.880337] tveeprom 0-0050: TV standards NTSC(M) (eeprom 0x08) > [ 10.880390] tveeprom 0-0050: audio processor is CX25841 (idx 35) > [ 10.880442] tveeprom 0-0050: decoder processor is CX25841 (idx 28) > [ 10.880494] tveeprom 0-0050: has no radio, has IR receiver, has IR > transmitter > [ 10.880557] ivtv0: Autodetected Hauppauge WinTV PVR-150 > [ 10.880607] ivtv0: Reopen i2c bus for IR-blaster support > > > > [ 12.667545] cx25840 0-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #0) > [ 14.118219] tuner 0-0061: chip found @ 0xc2 (ivtv i2c driver #0) > [ 14.529890] wm8775 0-001b: chip found @ 0x36 (ivtv i2c driver #0) > [ 15.371353] tuner-simple 0-0061: creating new instance > [ 15.371410] tuner-simple 0-0061: type set to 50 (TCL 2002N) > [ 15.372369] IRQ 18/ivtv0: IRQF_DISABLED is not guaranteed on shared IRQs > [ 15.373626] ivtv0: Registered device video0 for encoder MPG (4096 kB) > [ 15.374463] ivtv0: Registered device video32 for encoder YUV (2048 kB) > [ 15.374601] ivtv0: Registered device vbi0 for encoder VBI (1024 kB) > [ 15.374678] ivtv0: Registered device video24 for encoder PCM (320 kB) > [ 15.374731] ivtv0: Initialized card: Hauppauge WinTV PVR-150 > > > > [ 46.500015] ivtv 0000:00:08.0: firmware: requesting v4l-cx2341x-enc.fw > [ 46.570501] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must > be 376836 bytes) > [ 46.570570] ivtv0: Did you put the firmware in the hotplug firmware > directory? > [ 46.570634] ivtv0: Retry loading firmware > [ 47.192019] ivtv 0000:00:08.0: firmware: requesting v4l-cx2341x-enc.fw > [ 47.200641] ivtv0: Unable to open firmware v4l-cx2341x-enc.fw (must > be 376836 bytes) > [ 47.200710] ivtv0: Did you put the firmware in the hotplug firmware > directory? > [ 47.200775] ivtv0: Failed to initialize on minor 2 > [ 47.207908] ivtv0: Failed to initialize on minor 0 > [ 47.214245] ivtv0: Failed to initialize on minor 3 > [ 47.221233] ivtv0: Failed to initialize on minor 1 > --------------------------------------------------------------------- > > Am I missing something, somewhere? Should I have received a disk with > firmware that I need to install somewhere? Can said firmware be > downloaded from somewhere on th Hauppauge site? > > Never having done any of this before, I am now at a loss. Can someone > point me in the right direction? > > Marc > >
Hi, apt-file search v4l-cx2341x-enc.fw firmware-ivtv: /lib/firmware/v4l-cx2341x-enc.fw Then a: aptitude search ivtv should put you on the right track. Hope it helps. -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4cf4bdce.2030...@googlemail.com
