vr put forth on 11/22/2010 5:32 PM: > mii-tool is showing: > eth0: negotiated 1000baseT-HD flow-control, link ok > eth1: negotiated 1000baseT-HD flow-control, link ok > > but "mii-tool bond0" shows: > bond0 10 Mbit, half duplex, link ok > > My switchport says the port is currently at 1000... How can I get that > bonded link to return the right speed at the host?
Switch *port* or *port[s]*. Your original email said you're linking to two separate switches, one attached to each NIC. Which bonding mode are you using (0-6)? If you are using mode 4 this won't work with two switches. 802.3ad requires both bonded ports be on the same switch, and the switch must be manually programmed for this. Configuring mode 4 on your Linux host with each cable going to a different switch may very likely cause the bogus mii-tool output for the bonded link. Give us _all_ of the technical details of how you _want_ this setup and how you currently have it setup so that we may better help you. -- Stan -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/4ceb08ce.4000...@hardwarefreak.com
