Hi, I built a debian server a while ago, with all of the main partitions across an LVM volume, which is then mirrored across two drives using kernel RAID1. I left swap out and effectively stripe them by setting their priority to 1 in /etc/fstab. However the boot partition still only exists on one of the disks (/dev/sda1). I would like to mirror that as well so if either drive goes down, the system can boot regardless. I distantly remember being warned off creating them as a RAID1, but can't remember the exact reason. How's the best way of achieving want I want and does anyone have any good up-to-date instructions? I've cut and pasted the file list at the bottom,
On a side note, if I remove one of the disks from a raid 1 configuration, if I then mount the partitions, are they safely readable as with any ordinary ext3 partition for instance? Thanks for any help, James Hawaiian:/home/ja# fdisk -l /dev/sd[ab] Disk /dev/sda: 1000.2 GB, 1000203804160 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf229fe3e Device Boot Start End Blocks Id System /dev/sda1 * 1 37 297171 83 Linux /dev/sda2 38 524 3911827+ 82 Linux swap / Solaris /dev/sda3 525 121601 972551002+ fd Linux raid autodetect Disk /dev/sdb: 1000.2 GB, 1000203804160 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00049c5c Device Boot Start End Blocks Id System /dev/sdb1 1 37 297171 83 Linux /dev/sdb2 38 524 3911827+ 82 Linux swap / Solaris /dev/sdb3 525 121601 972551002+ fd Linux raid autodetect
