Ok, so I'm trying to get an SMC2602W 802.11b PCI card to work on my debian 3.0 install using the hard drive of version of knoppix on desktop machine. Any help would be greatly appreciated. The windows box particpates on the network just fine, so I know that's not an issue.
Others have mentioned that this does not require PCMCIA support, just the various wireless tools and the right driver. I have confirmed that this card uses the ADM8211 chipset which is supported by drivers downloaded from http://www.admtek.com.tw/. I've installed various wireless tools like iwconfig and they communicate with the card just fine. I THINK the card even tries to tell me that it's getting a good signal (iwconfig link quality is 95). How do I tell debian to tell the card to grab an IP address from the gateway (192.168.1.1) and start routing traffic? ifconfig shows lo and the hardware at eth2 and /etc/network/options has ip_forward=no, /etc/network/interfaces contains auto lo eth2 iface eth2 inet dhcp wireless_essid linksys wireless_mode Managed gateway 192.168.1.1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
