Hello, Running Lenny, I am seeing the following ntp logs under "daemon.log":
*** Dec 1 07:33:36 serv2 ntpd[3841]: ntpd 4.2....@1.1520-o Mon May 11 20:13:01 UTC 2009 (1) Dec 1 07:33:36 serv2 ntpd[3842]: precision = 1.000 usec Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #1 wildcard, ::#123 Disabled Dec 1 07:33:36 serv2 ntpd[3842]: bind() fd 18, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address Dec 1 07:33:36 serv2 ntpd[3842]: unable to create socket on bond0 (2) for fe80::230:48ff:fe76:c1ba#123 Dec 1 07:33:36 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #3 lo, ::1#123 Enabled Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #4 lo, 127.0.0.1#123 Enabled Dec 1 07:33:36 serv2 ntpd[3842]: Listening on interface #5 bond0, 172.16.0.11#123 Enabled Dec 1 07:33:36 serv2 ntpd[3842]: kernel time sync status 0040 Dec 1 07:33:36 serv2 ntpd[3842]: frequency initialized 28.424 PPM from /var/lib/ntp/ntp.drift Dec 1 07:36:16 serv2 ntpd[3949]: signal_no_reset: signal 17 had flags 4000000 Dec 1 07:36:17 serv2 ntpd[3842]: bind() fd 21, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address Dec 1 07:36:17 serv2 ntpd[3842]: unable to create socket on bond0 (6) for fe80::230:48ff:fe76:c1ba#123 Dec 1 07:36:17 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba Dec 1 07:38:58 serv2 ntpd_initres[3949]: signal_no_reset: signal 14 had flags 4000000 Dec 1 07:41:17 serv2 ntpd[3842]: bind() fd 21, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address Dec 1 07:41:17 serv2 ntpd[3842]: unable to create socket on bond0 (7) for fe80::230:48ff:fe76:c1ba#123 Dec 1 07:41:17 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba Dec 1 07:46:17 serv2 ntpd[3842]: bind() fd 21, family 10, port 123, scope 4, addr fe80::230:48ff:fe76:c1ba, in6_is_addr_multicast=0 flags=0x11 fails: Cannot assign requested address Dec 1 07:46:17 serv2 ntpd[3842]: unable to create socket on bond0 (8) for fe80::230:48ff:fe76:c1ba#123 Dec 1 07:46:17 serv2 ntpd[3842]: failed to initialize interface for address fe80::230:48ff:fe76:c1ba *** These entries are being repeated every 5 minutes or so, flooding the "dameon.log" file. It seems ntpd tries to bind to the ipv6 address of the "bond0" interface and fails. Any clue on this? :-? Greetings, -- Camaleón -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
