Hello Frank. I created a .sh that modify /etc/network/interfaces and /etc/hostname and I solved with this, seems to me the most easy solution to the problem.
Thanks fo the advice Josep from Spain El dom, 04-10-2009 a las 14:25 +0200, Frank Lin PIAT escribió: > On Sat, 2009-10-03 at 23:51 +0200, Josep M. wrote: > > Hello. > > > > I have a preseed file, all runs ok, except install network manually, > > always install DHCP, I have disabled DHCP and debconf is well > > configured, I have four problems : > > > > 1 - For install network without enable dhcp I must write when boot: > > > > netcfg/disable_dhcp=true preseed/url=ftp://192.168.x.x/preseed.cfg > > > > 2 - I must enter network info manually, all network info in preseed.cfg > > is not used > > Chicken and egg problem... to fetch the preseed file, your system needs > an IP address (which can be obtained by DHCP, or manually specified on > the command line). > > I suppose that in most case, the server are netboot'ed using DHCP, to > perform the installation, then the computer is configured to use static > IP address (using the preseed file???). Of course, the DHCP could be > have MAC<->IP address reservation. > > BTW, If you go for DHCP you might want to have a look at the > "auto-install/enable=true" command line. > > Regards, > > Franklin > > -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
