On Mon September 21 2009, Florian Kriener wrote: > Sounds like a kernel bug. Can you reproduce the bug? Please send the > output of dmesg.
yes, I see the message appearing every day... paulandcilla:/home/pbc/Documents/software# dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-19) (da...@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Aug 19 06:06:52 UTC 2009 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009a800 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe53c00 (usable) [ 0.000000] BIOS-e820: 000000007fe53c00 - 000000007fe55c00 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007fe55c00 - 000000007fe57c00 (ACPI data) [ 0.000000] BIOS-e820: 000000007fe57c00 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 1150MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at [c00fe710] 000fe710 [ 0.000000] Entering add_active_range(0, 0, 523859) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 523859 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 523859 [ 0.000000] On node 0 totalpages: 523859 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 2301 pages used for memmap [ 0.000000] HighMem zone: 292182 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 000FD08B, 007C (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: FACP 000FD1AB, 00F4 (r3 DELL B8K 14 ASL 61) [ 0.000000] ACPI: DSDT FFFCD3F5, 333E (r1 DELL dt_ex 1000 INTL 20050624) [ 0.000000] ACPI: FACS 7FE53C00, 0040 [ 0.000000] ACPI: SSDT FFFD0A11, 009C (r1 DELL st_ex 1000 INTL 20050624) [ 0.000000] ACPI: APIC 000FD29F, 0092 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: BOOT 000FD331, 0028 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: MCFG 000FD359, 003E (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: HPET 000FD397, 0038 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: DUMY 7FE55C00, 0024 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: SLIC 000FD3CF, 0176 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: SSDT 7FE53C40, 0175 (r1 DpgPmm Cpu0Ist 11 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE54049, 0175 (r1 DpgPmm Cpu1Ist 11 INTL 20050624) [ 0.000000] ACPI: SSDT 7FE54452, 0140 (r1 DpgPmm CpuPm 10 INTL 20050624) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 8 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519766 [ 0.000000] Kernel command line: root=/dev/sda6 ro expertgui i386 [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 1862.072 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Memory: 2066392k/2095436k available (1770k kernel code, 27836k reserved, 751k data, 244k init, 1177932k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB) [ 0.004000] .data : 0xc02ba9a9 - 0xc0376620 ( 751 kB) [ 0.004000] .text : 0xc0100000 - 0xc02ba9a9 (1770 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] hpet clockevent registered [ 0.083860] Calibrating delay using timer specific routine.. 3727.30 BogoMIPS (lpj=7454619) [ 0.083979] Security Framework initialized [ 0.084005] SELinux: Disabled at boot. [ 0.084005] Capability LSM initialized [ 0.084005] Mount-cache hash table entries: 512 [ 0.084005] Initializing cgroup subsys ns [ 0.084005] Initializing cgroup subsys cpuacct [ 0.084005] Initializing cgroup subsys devices [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.084005] CPU: L2 cache: 2048K [ 0.084005] CPU: Physical Processor ID: 0 [ 0.084005] CPU: Processor Core ID: 0 [ 0.084005] Intel machine check architecture supported. [ 0.084005] Intel machine check reporting enabled on CPU#0. [ 0.084005] using mwait in idle threads. [ 0.084005] Checking 'hlt' instruction... OK. [ 0.100006] ACPI: Core revision 20080321 [ 0.252015] ENABLING IO-APIC IRQs [ 0.252015] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.291902] CPU0: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 0.292018] Booting processor 1/1 ip 6000 [ 0.300018] Initializing CPU#1 [ 0.300018] Calibrating delay using timer specific routine.. 3724.07 BogoMIPS (lpj=7448143) [ 0.300018] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.300018] CPU: L2 cache: 2048K [ 0.300018] CPU: Physical Processor ID: 0 [ 0.300018] CPU: Processor Core ID: 1 [ 0.300018] Intel machine check architecture supported. [ 0.300018] Intel machine check reporting enabled on CPU#1. [ 0.380023] CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 [ 0.380023] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.384024] Brought up 2 CPUs [ 0.384024] Total of 2 processors activated (7451.38 BogoMIPS). [ 0.384024] CPU0 attaching sched-domain: [ 0.384024] domain 0: span 0-1 [ 0.384024] groups: 0 1 [ 0.384024] CPU1 attaching sched-domain: [ 0.384024] domain 0: span 0-1 [ 0.384024] groups: 1 0 [ 0.384024] net_namespace: 660 bytes [ 0.384024] Booting paravirtualized kernel on bare hardware [ 0.384024] NET: Registered protocol family 16 [ 0.384024] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.384024] ACPI: bus type pci registered [ 0.384024] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.384024] PCI: MCFG area at e0000000 reserved in E820 [ 0.384024] PCI: Using MMCONFIG for extended config space [ 0.384024] PCI: Using configuration type 1 for base access [ 0.384024] Setting up standard PCI resources [ 0.384464] ACPI: EC: Look up EC in DSDT [ 0.430711] ACPI: BIOS _OSI(Linux) query ignored [ 0.430756] ACPI: DMI System Vendor: Dell Inc. [ 0.430801] ACPI: DMI Product Name: Dell DXP061 [ 0.430846] ACPI: DMI Product Version: [ 0.430889] ACPI: DMI Board Name: 0WG855 [ 0.430932] ACPI: DMI BIOS Vendor: Dell Inc. [ 0.430977] ACPI: DMI BIOS Date: 11/22/2007 [ 0.431020] ACPI: Please send DMI info above to linux-a...@vger.kernel.org [ 0.431067] ACPI: If "acpi_osi=Linux" works better, please notify linux-a...@vger.kernel.org [ 0.452502] ACPI: Interpreter enabled [ 0.452546] ACPI: (supports S0 S3 S4 S5) [ 0.452711] ACPI: Using IOAPIC for interrupt routing [ 0.549782] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.549782] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.549782] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 0.549782] PCI: Transparent bridge - 0000:00:1e.0 [ 0.549782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.549782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.549782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.549782] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.550283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] [ 1.505782] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 1.505782] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.506926] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.513527] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.514739] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.515253] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.516404] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.517536] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 1.519253] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.519253] pnp: PnP ACPI init [ 1.519253] ACPI: bus type pnp registered [ 1.564226] pnp 00:08: can't add resource for IO 0x2e00-0x2efe [ 1.567253] pnp: PnP ACPI: found 10 devices [ 1.567253] ACPI: ACPI bus type pnp unregistered [ 1.567253] PnPBIOS: Disabled by ACPI PNP [ 1.571253] PCI: Using ACPI for IRQ routing [ 1.574917] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.575078] hpet0: 3 64-bit timers, 14318180 Hz [ 1.575276] ACPI: RTC can wake from S4 [ 1.577997] Switched to high resolution mode on CPU 0 [ 1.580312] Switched to high resolution mode on CPU 1 [ 1.582006] system 00:01: ioport range 0x800-0x85f has been reserved [ 1.582055] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 1.582103] system 00:01: ioport range 0x860-0x8ff could not be reserved [ 1.582161] system 00:07: iomem range 0x0-0x9ffff could not be reserved [ 1.584308] system 00:07: iomem range 0x100000-0xffffff could not be reserved [ 1.584308] system 00:07: iomem range 0x1000000-0x7fe53bff could not be reserved [ 1.584308] system 00:07: iomem range 0xf0000-0xfffff could not be reserved [ 1.584308] system 00:07: iomem range 0xc0000-0xd7fff could not be reserved [ 1.584308] system 00:07: iomem range 0xfec00000-0xfecfffff could not be reserved [ 1.584308] system 00:07: iomem range 0xfee00000-0xfeefffff could not be reserved [ 1.584308] system 00:07: iomem range 0xffb00000-0xffbfffff could not be reserved [ 1.584308] system 00:07: iomem range 0xffc00000-0xffffffff could not be reserved [ 1.584308] system 00:08: ioport range 0x100-0x1fe has been reserved [ 1.584308] system 00:08: ioport range 0x200-0x277 has been reserved [ 1.584308] system 00:08: ioport range 0x280-0x2e7 has been reserved [ 1.584308] system 00:08: ioport range 0x2e8-0x2ef has been reserved [ 1.584308] system 00:08: ioport range 0x2f0-0x2f7 has been reserved [ 1.584308] system 00:08: ioport range 0x2f8-0x2ff has been reserved [ 1.584308] system 00:08: ioport range 0x300-0x377 has been reserved [ 1.584308] system 00:08: ioport range 0x380-0x3bb has been reserved [ 1.584308] system 00:08: ioport range 0x3c0-0x3e7 could not be reserved [ 1.584308] system 00:08: ioport range 0x3f6-0x3f7 has been reserved [ 1.584308] system 00:08: ioport range 0x400-0x4cf has been reserved [ 1.584308] system 00:08: ioport range 0x4d2-0x57f has been reserved [ 1.584308] system 00:08: ioport range 0x580-0x677 has been reserved [ 1.584308] system 00:08: ioport range 0x680-0x777 has been reserved [ 1.584308] system 00:08: ioport range 0x780-0x7bb has been reserved [ 1.584308] system 00:08: ioport range 0x7c0-0x7ff has been reserved [ 1.584308] system 00:08: ioport range 0x8e0-0x8ff has been reserved [ 1.584308] system 00:08: ioport range 0x900-0x9fe has been reserved [ 1.584308] system 00:08: ioport range 0xa00-0xafe has been reserved [ 1.584308] system 00:08: ioport range 0xb00-0xbfe has been reserved [ 1.584308] system 00:08: ioport range 0xc80-0xcaf has been reserved [ 1.584308] system 00:08: ioport range 0xcb0-0xcbf has been reserved [ 1.584308] system 00:08: ioport range 0xcc0-0xcf7 has been reserved [ 1.584308] system 00:08: ioport range 0xd00-0xdfe has been reserved [ 1.584308] system 00:08: ioport range 0xe00-0xefe has been reserved [ 1.584308] system 00:08: ioport range 0xf00-0xffe has been reserved [ 1.584308] system 00:08: ioport range 0x2000-0x20fe has been reserved [ 1.584308] system 00:08: ioport range 0x2100-0x21fe has been reserved [ 1.584308] system 00:08: ioport range 0x2200-0x22fe has been reserved [ 1.584308] system 00:08: ioport range 0x2300-0x23fe has been reserved [ 1.584308] system 00:08: ioport range 0x2400-0x24fe has been reserved [ 1.584308] system 00:08: ioport range 0x2500-0x25fe has been reserved [ 1.584308] system 00:08: ioport range 0x2600-0x26fe has been reserved [ 1.584308] system 00:08: ioport range 0x2700-0x27fe has been reserved [ 1.584308] system 00:08: ioport range 0x2800-0x28fe has been reserved [ 1.584308] system 00:08: ioport range 0x2900-0x29fe has been reserved [ 1.584308] system 00:08: ioport range 0x2a00-0x2afe has been reserved [ 1.584308] system 00:08: ioport range 0x2b00-0x2bfe has been reserved [ 1.584360] system 00:08: ioport range 0x2c00-0x2cfe has been reserved [ 1.584407] system 00:08: ioport range 0x2d00-0x2dfe has been reserved [ 1.584454] system 00:08: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.584511] system 00:08: iomem range 0xfeda0000-0xfedacfff has been reserved [ 1.618797] PCI: Bridge: 0000:00:01.0 [ 1.618797] IO window: disabled. [ 1.618797] MEM window: 0xdd000000-0xdfefffff [ 1.618797] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff [ 1.618797] PCI: Bridge: 0000:00:1c.0 [ 1.618797] IO window: disabled. [ 1.618797] MEM window: 0xdcf00000-0xdcffffff [ 1.618797] PREFETCH window: disabled. [ 1.618797] PCI: Bridge: 0000:00:1c.4 [ 1.618797] IO window: disabled. [ 1.618797] MEM window: 0xdce00000-0xdcefffff [ 1.618797] PREFETCH window: 0x00000000d0000000-0x00000000d1ffffff [ 1.618797] PCI: Bridge: 0000:00:1e.0 [ 1.618797] IO window: d000-dfff [ 1.618797] MEM window: 0xdcd00000-0xdcdfffff [ 1.618797] PREFETCH window: disabled. [ 1.618798] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.618798] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.618798] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.618798] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.618798] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.618798] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 1.618798] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.618798] NET: Registered protocol family 2 [ 1.631069] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.634799] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.635208] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.635425] TCP: Hash tables configured (established 131072 bind 65536) [ 1.635471] TCP reno registered [ 1.642526] NET: Registered protocol family 1 [ 1.642784] checking if image is initramfs... it is [ 2.226075] Freeing initrd memory: 7046k freed [ 2.226326] Simple Boot Flag at 0x7a set to 0x1 [ 2.228338] audit: initializing netlink socket (disabled) [ 2.228401] type=2000 audit(1253309918.212:1): initialized [ 2.230091] highmem bounce pool size: 64 pages [ 2.230136] Total HugeTLB memory allocated, 0 [ 2.230322] VFS: Disk quotas dquot_6.5.1 [ 2.230322] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.230322] msgmni has been set to 1750 [ 2.230322] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 2.230322] io scheduler noop registered [ 2.230322] io scheduler anticipatory registered [ 2.230322] io scheduler deadline registered [ 2.230322] io scheduler cfq registered (default) [ 2.230322] pci 0000:01:00.0: Boot video device [ 2.230322] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 2.230322] assign_interrupt_mode Found MSI capability [ 2.230322] Allocate Port Service[0000:00:01.0:pcie00] [ 2.230322] Allocate Port Service[0000:00:01.0:pcie03] [ 2.230322] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 2.230322] assign_interrupt_mode Found MSI capability [ 2.230322] Allocate Port Service[0000:00:1c.0:pcie00] [ 2.230322] Allocate Port Service[0000:00:1c.0:pcie02] [ 2.230322] Allocate Port Service[0000:00:1c.0:pcie03] [ 2.230322] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 2.230322] assign_interrupt_mode Found MSI capability [ 2.230322] Allocate Port Service[0000:00:1c.4:pcie00] [ 2.230322] Allocate Port Service[0000:00:1c.4:pcie02] [ 2.230322] Allocate Port Service[0000:00:1c.4:pcie03] [ 2.230323] isapnp: Scanning for PnP cards... [ 2.583788] isapnp: No Plug & Play device found [ 2.587789] hpet_resources: 0xfed00000 is busy [ 2.587789] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 2.587789] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.587789] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.588203] brd: module loaded [ 2.588383] PNP: No PS/2 controller found. Probing ports directly. [ 2.591489] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.591536] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.591717] mice: PS/2 mouse device common for all mice [ 2.591788] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 2.591788] rtc0: alarms up to one day [ 2.591788] cpuidle: using governor ladder [ 2.591788] cpuidle: using governor menu [ 2.591834] No iBFT detected. [ 2.592067] TCP cubic registered [ 2.592110] NET: Registered protocol family 17 [ 2.592159] Using IPI No-Shortcut mode [ 2.594307] registered taskstats version 1 [ 2.594508] rtc_cmos 00:05: setting system clock to 2009-09-18 21:38:39 UTC (1253309919) [ 2.594685] Freeing unused kernel memory: 244k freed [ 2.686495] ACPI: ACPI0007:00 is registered as cooling_device0 [ 2.686495] ACPI: ACPI0007:01 is registered as cooling_device1 [ 2.899535] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2 [ 2.899535] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 2.899535] ACPI: PCI Interrupt 0000:00:19.0[A] -> GSI 21 (level, low) -> IRQ 21 [ 2.899535] PCI: Setting latency timer of device 0000:00:19.0 to 64 [ 2.919536] usbcore: registered new interface driver usbfs [ 2.919536] usbcore: registered new interface driver hub [ 2.919536] usbcore: registered new device driver usb [ 2.931537] USB Universal Host Controller Interface driver v3.0 [ 2.987536] No dock devices found. [ 3.007535] SCSI subsystem initialized [ 3.039604] libata version 3.00 loaded. [ 3.111627] eth0: (PCI Express:2.5GB/s:Width x1) 00:16:76:bc:3f:af [ 3.111627] eth0: Intel(R) PRO/1000 Network Connection [ 3.111627] eth0: MAC: 5, PHY: 6, PBA No: 1021ff-0ff [ 3.111627] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.111627] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 3.111627] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.111627] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.111627] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 3.111627] usb usb1: configuration #1 chosen from 1 choice [ 3.111627] hub 1-0:1.0: USB hub found [ 3.111627] hub 1-0:1.0: 2 ports detected [ 3.212051] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.212100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.212158] usb usb1: Product: UHCI Host Controller [ 3.212203] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 3.212259] usb usb1: SerialNumber: 0000:00:1a.0 [ 3.215657] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.215657] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 3.215657] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.215657] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.215657] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 3.215657] usb usb2: configuration #1 chosen from 1 choice [ 3.215657] hub 2-0:1.0: USB hub found [ 3.215657] hub 2-0:1.0: 2 ports detected [ 3.318622] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.318671] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.318728] usb usb2: Product: UHCI Host Controller [ 3.318774] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 3.318830] usb usb2: SerialNumber: 0000:00:1a.1 [ 3.318774] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 3.318774] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 3.318774] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.318774] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3 [ 3.372606] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.372654] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 3.372663] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdffdac00 [ 3.386786] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.386908] usb usb3: configuration #1 chosen from 1 choice [ 3.386983] hub 3-0:1.0: USB hub found [ 3.390778] hub 3-0:1.0: 4 ports detected [ 3.535076] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.535125] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.535183] usb usb3: Product: EHCI Host Controller [ 3.535243] usb usb3: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 3.539240] usb usb3: SerialNumber: 0000:00:1a.7 [ 3.539240] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.539240] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.539240] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.539240] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4 [ 3.539240] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 3.539240] usb usb4: configuration #1 chosen from 1 choice [ 3.539240] hub 4-0:1.0: USB hub found [ 3.539240] hub 4-0:1.0: 2 ports detected [ 3.643134] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.643183] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.643221] usb usb4: Product: UHCI Host Controller [ 3.643221] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 3.643221] usb usb4: SerialNumber: 0000:00:1d.0 [ 3.643221] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.643221] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.643221] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.643221] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 3.643221] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 3.643221] usb usb5: configuration #1 chosen from 1 choice [ 3.643221] hub 5-0:1.0: USB hub found [ 3.643221] hub 5-0:1.0: 2 ports detected [ 3.785516] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.785565] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.785623] usb usb5: Product: UHCI Host Controller [ 3.785669] usb usb5: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 3.785725] usb usb5: SerialNumber: 0000:00:1d.1 [ 3.787229] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.787229] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.787229] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.787229] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 3.787229] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 3.787229] usb usb6: configuration #1 chosen from 1 choice [ 3.787229] hub 6-0:1.0: USB hub found [ 3.787229] hub 6-0:1.0: 2 ports detected [ 3.909419] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.909468] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.909525] usb usb6: Product: UHCI Host Controller [ 3.909571] usb usb6: Manufacturer: Linux 2.6.26-2-686 uhci_hcd [ 3.909627] usb usb6: SerialNumber: 0000:00:1d.2 [ 3.909571] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.909571] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.909571] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.909571] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 3.954159] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.954206] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.954211] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800 [ 3.969907] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.970030] usb usb7: configuration #1 chosen from 1 choice [ 3.970105] hub 7-0:1.0: USB hub found [ 3.973900] hub 7-0:1.0: 6 ports detected [ 4.078548] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 4.078597] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.078655] usb usb7: Product: EHCI Host Controller [ 4.078714] usb usb7: Manufacturer: Linux 2.6.26-2-686 ehci_hcd [ 4.078759] usb usb7: SerialNumber: 0000:00:1d.7 [ 4.078759] ahci 0000:00:1f.2: version 3.0 [ 4.078759] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 4.346765] usb 1-2: new low speed USB device using uhci_hcd and address 2 [ 4.498741] usb 1-2: configuration #1 chosen from 1 choice [ 4.522722] usb 1-2: New USB device found, idVendor=0461, idProduct=4d15 [ 4.522722] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 4.522722] usb 1-2: Product: USB Optical Mouse [ 5.322101] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode [ 5.322161] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part [ 5.322221] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 5.324027] scsi0 : ahci [ 5.324027] scsi1 : ahci [ 5.324027] scsi2 : ahci [ 5.324027] scsi3 : ahci [ 5.324027] scsi4 : ahci [ 5.324027] scsi5 : ahci [ 5.324027] ata1: SATA max UDMA/133 abar m2...@0xff970000 port 0xff970100 irq 219 [ 5.324027] ata2: SATA max UDMA/133 abar m2...@0xff970000 port 0xff970180 irq 219 [ 5.324027] ata3: SATA max UDMA/133 abar m2...@0xff970000 port 0xff970200 irq 219 [ 5.324027] ata4: SATA max UDMA/133 abar m2...@0xff970000 port 0xff970280 irq 219 [ 5.324027] ata5: SATA max UDMA/133 abar m2...@0xff970000 port 0xff970300 irq 219 [ 5.324027] ata6: SATA max UDMA/133 abar m2...@0xff970000 port 0xff970380 irq 219 [ 5.829389] usb 7-2: new high speed USB device using ehci_hcd and address 2 [ 6.083179] usb 7-2: configuration #1 chosen from 1 choice [ 6.083179] usb 7-2: New USB device found, idVendor=0644, idProduct=0200 [ 6.083179] usb 7-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.083179] usb 7-2: Product: CA-200 [ 6.083179] usb 7-2: Manufacturer: TEAC [ 6.083179] usb 7-2: SerialNumber: 00000401C725 [ 6.133831] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 6.149952] ata1.00: ATA-7: WDC WD3200KS-75PFB0, 21.00M21, max UDMA/133 [ 6.149952] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 6.149952] ata1.00: configured for UDMA/133 [ 6.617997] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 6.617985] ata2.00: ATAPI: HL-DT-STDVD+-RW GSA-H31N, B106, max UDMA/100 [ 6.617985] ata2.00: configured for UDMA/100 [ 6.636006] usb 7-5: new high speed USB device using ehci_hcd and address 4 [ 6.775348] usb 7-5: configuration #1 chosen from 1 choice [ 6.777909] usb 7-5: New USB device found, idVendor=04b8, idProduct=082c [ 6.777958] usb 7-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.778007] usb 7-5: Product: USB2.0 MFP(Hi-Speed) [ 6.778052] usb 7-5: Manufacturer: EPSON [ 6.778097] usb 7-5: SerialNumber: W57P10707310003510 [ 7.095467] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 7.140721] ata3.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133 [ 7.140721] ata3.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 7.199022] ata3.00: configured for UDMA/133 [ 7.343602] usb 5-1: new low speed USB device using uhci_hcd and address 2 [ 7.643164] usb 5-1: configuration #1 chosen from 1 choice [ 7.681869] usb 5-1: New USB device found, idVendor=051d, idProduct=0002 [ 7.681918] usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 7.681966] usb 5-1: Product: Back-UPS ES 650 FW:842.J3 .D USB FW:J3 [ 7.682019] usb 5-1: Manufacturer: APC [ 7.682062] usb 5-1: SerialNumber: 3B0851X15875 [ 7.683187] ata4: SATA link down (SStatus 0 SControl 300) [ 7.930877] usb 6-2: new low speed USB device using uhci_hcd and address 2 [ 8.142956] ata5: SATA link down (SStatus 0 SControl 300) [ 8.210916] usb 6-2: configuration #1 chosen from 1 choice [ 8.279470] usb 6-2: New USB device found, idVendor=413c, idProduct=2105 [ 8.279470] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 8.279470] usb 6-2: Product: Dell USB Keyboard [ 8.279470] usb 6-2: Manufacturer: Dell [ 8.484376] ata6: SATA link down (SStatus 0 SControl 300) [ 8.500366] scsi 0:0:0:0: Direct-Access ATA WDC WD3200KS-75P 21.0 PQ: 0 ANSI: 5 [ 8.500366] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H31N B106 PQ: 0 ANSI: 5 [ 8.500366] scsi 2:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5 [ 8.544596] Driver 'sd' needs updating - please use bus_type methods [ 8.544596] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 8.544596] sd 0:0:0:0: [sda] Write Protect is off [ 8.544596] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.544596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.544596] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 8.544596] sd 0:0:0:0: [sda] Write Protect is off [ 8.544596] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 8.544596] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.544596] sda: sda1 sda2 sda3 sda4 <<4>Driver 'sr' needs updating - please use bus_type methods [ 8.572596] sda5 sda6 sda7 > [ 8.598556] sd 0:0:0:0: [sda] Attached SCSI disk [ 8.598678] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 8.598738] sd 2:0:0:0: [sdb] Write Protect is off [ 8.598783] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.598809] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.598912] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 8.598972] sd 2:0:0:0: [sdb] Write Protect is off [ 8.599017] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 8.599042] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 8.599102] sdb:sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 8.604596] Uniform CD-ROM driver Revision: 3.20 [ 8.604596] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 8.620597] sdb1 < sdb5 sdb6 sdb7 sdb8<6>usbcore: registered new interface driver hiddev [ 8.669175] Initializing USB Mass Storage driver... [ 8.675354] sdb9 > [ 8.675631] sd 2:0:0:0: [sdb] Attached SCSI disk [ 8.680597] input: USB Optical Mouse as /class/input/input0 [ 8.697523] input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-2 [ 8.697781] scsi6 : SCSI emulation for USB Mass Storage devices [ 8.697917] scsi7 : SCSI emulation for USB Mass Storage devices [ 8.698009] usb-storage: device found at 4 [ 8.698011] usb-storage: waiting for device to settle before scanning [ 8.700479] usb-storage: device found at 2 [ 8.700481] usb-storage: waiting for device to settle before scanning [ 8.719366] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 8.719440] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 8.719505] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 9.076635] hiddev96hidraw1: USB HID v1.10 Device [APC Back-UPS ES 650 FW:842.J3 .D USB FW:J3 ] on usb-0000:00:1d.1-1 [ 9.108950] input: Dell Dell USB Keyboard as /class/input/input1 [ 9.109189] input,hidraw2: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-2 [ 9.112962] usbcore: registered new interface driver usbhid [ 9.114994] usbcore: registered new interface driver usb-storage [ 9.114998] USB Mass Storage support registered. [ 9.114994] usbhid: v2.6:USB HID core driver [ 9.287004] PM: Starting manual resume from disk [ 9.336228] kjournald starting. Commit interval 5 seconds [ 9.336228] EXT3-fs: mounted filesystem with ordered data mode. [ 11.079241] udevd version 125 started [ 11.735137] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 12.040797] Linux agpgart interface v0.103 [ 12.067139] input: Power Button (FF) as /class/input/input2 [ 12.119809] ACPI: Power Button (FF) [PWRF] [ 12.119917] input: Power Button (CM) as /class/input/input3 [ 12.176182] ACPI: Power Button (CM) [VBTN] [ 12.903669] usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x082C [ 12.903752] usbcore: registered new interface driver usblp [ 13.068331] input: PC Speaker as /class/input/input4 [ 13.276882] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 20 (level, low) -> IRQ 20 [ 13.628922] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 13.628922] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 13.847611] usb-storage: device scan complete [ 13.847611] scsi 7:0:0:0: Direct-Access EPSON Stylus Storage 1.00 PQ: 0 ANSI: 2 [ 13.974815] usb-storage: device scan complete [ 13.978764] sd 7:0:0:0: [sdc] Attached SCSI removable disk [ 13.978764] sd 7:0:0:0: Attached scsi generic sg3 type 0 [ 13.978764] scsi 6:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0 [ 13.982764] scsi 6:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0 [ 13.986764] scsi 6:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0 [ 13.990764] scsi 6:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0 [ 13.993366] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 13.993455] sd 6:0:0:0: Attached scsi generic sg4 type 0 [ 13.998613] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 13.998695] sd 6:0:0:1: Attached scsi generic sg5 type 0 [ 14.003438] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 14.003438] sd 6:0:0:2: Attached scsi generic sg6 type 0 [ 14.054633] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 14.054725] sd 6:0:0:3: Attached scsi generic sg7 type 0 [ 15.091731] Adding 2104472k swap on /dev/sda5. Priority:-1 extents:1 across:2104472k [ 15.515442] EXT3 FS on sda6, internal journal [ 15.715792] loop: module loaded [ 15.739289] coretemp coretemp.0: Using relative temperature scale! [ 15.739384] coretemp coretemp.1: Using relative temperature scale! [ 15.827100] device-mapper: uevent: version 1.0.3 [ 15.827861] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com [ 17.501623] fuse init (API version 7.9) [ 17.630485] kjournald starting. Commit interval 5 seconds [ 17.630485] EXT3 FS on sda7, internal journal [ 17.630485] EXT3-fs: mounted filesystem with ordered data mode. [ 17.665623] kjournald starting. Commit interval 5 seconds [ 17.665623] EXT3 FS on sdb5, internal journal [ 17.665623] EXT3-fs: mounted filesystem with ordered data mode. [ 17.761643] kjournald starting. Commit interval 5 seconds [ 17.761643] EXT3 FS on sdb6, internal journal [ 17.761643] EXT3-fs: mounted filesystem with ordered data mode. [ 19.530580] ip_tables: (C) 2000-2006 Netfilter Core Team [ 19.558078] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 21.346324] RPC: Registered udp transport module. [ 21.346384] RPC: Registered tcp transport module. [ 21.498285] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 37.354952] lp: driver loaded but no devices found [ 37.372803] ppdev: user-space parallel port driver [ 40.915668] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 40.930575] NFSD: starting 90-second grace period [ 46.867512] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 46.867517] vboxdrv: Successfully done. [ 46.867519] vboxdrv: Found 2 processor cores. [ 46.867562] vboxdrv: fAsync=0 offMin=0x78c offMax=0x9c3 [ 46.867658] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 46.867715] vboxdrv: Successfully loaded version 3.0.4 (interface 0x000e0000). [ 50.340658] Bluetooth: Core ver 2.11 [ 50.340880] NET: Registered protocol family 31 [ 50.340927] Bluetooth: HCI device and connection manager initialized [ 50.340976] Bluetooth: HCI socket layer initialized [ 50.456217] Bluetooth: L2CAP ver 2.9 [ 50.456217] Bluetooth: L2CAP socket layer initialized [ 50.536698] Bluetooth: RFCOMM socket layer initialized [ 50.536698] Bluetooth: RFCOMM TTY layer initialized [ 50.536698] Bluetooth: RFCOMM ver 1.8 [ 52.465818] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 57.343637] nvidia: module license 'NVIDIA' taints kernel. [ 57.598400] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 57.598414] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 57.598658] NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.36 Fri Aug 14 17:18:04 PDT 2009 [ 81.853717] kjournald starting. Commit interval 5 seconds [ 81.861717] kjournald starting. Commit interval 5 seconds [ 81.861717] EXT3 FS on sdb9, internal journal [ 81.861717] EXT3-fs: mounted filesystem with ordered data mode. [ 81.875429] EXT3 FS on sdb8, internal journal [ 81.875437] EXT3-fs: mounted filesystem with ordered data mode. [ 82.022084] kjournald starting. Commit interval 5 seconds [ 82.022483] EXT3 FS on sdb7, internal journal [ 82.022488] EXT3-fs: mounted filesystem with ordered data mode. [ 141.872957] ecryptfs_parse_options: eCryptfs: unrecognized option 'rw' [ 141.872957] ecryptfs_parse_options: eCryptfs: unrecognized option 'user=pbc' [ 142.019330] padlock: VIA PadLock not detected. [ 199.214088] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 199.214093] eth0: 10/100 speed: disabling TSO [ 214.341535] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 214.341540] eth0: 10/100 speed: disabling TSO [ 329.401486] eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 329.401491] eth0: 10/100 speed: disabling TSO [30617.469935] Not cloning cgroup for unused subsystem ns [37695.112832] Not cloning cgroup for unused subsystem ns [60124.233260] Not cloning cgroup for unused subsystem ns [76620.784740] cdrom: This disc doesn't have any tracks I recognize! [81914.070587] Not cloning cgroup for unused subsystem ns [82105.389730] Not cloning cgroup for unused subsystem ns [83474.938786] Not cloning cgroup for unused subsystem ns [93701.541341] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=96.236.232.162 DST=192.168.10.2 LEN=1484 TOS=0x00 PREC=0x00 TTL=49 ID=2385 DF PROTO=TCP SPT=46469 DPT=41463 WINDOW=17328 RES=0x00 ACK URGP=0 [96521.331067] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=70.75.203.31 DST=192.168.10.2 LEN=40 TOS=0x00 PREC=0x00 TTL=112 ID=54060 DF PROTO=TCP SPT=60172 DPT=50346 WINDOW=64407 RES=0x00 ACK URGP=0 [96544.245218] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=70.75.203.31 DST=192.168.10.2 LEN=1280 TOS=0x00 PREC=0x00 TTL=112 ID=55338 DF PROTO=TCP SPT=60172 DPT=50346 WINDOW=64407 RES=0x00 ACK URGP=0 [118888.946541] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=123.8.163.45 DST=192.168.10.2 LEN=108 TOS=0x00 PREC=0x00 TTL=110 ID=44565 DF PROTO=TCP SPT=22411 DPT=39307 WINDOW=65467 RES=0x00 ACK PSH URGP=0 [127183.197887] Not cloning cgroup for unused subsystem ns [127238.576568] Not cloning cgroup for unused subsystem ns [127966.089973] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=67.170.71.136 DST=192.168.10.2 LEN=176 TOS=0x00 PREC=0x00 TTL=106 ID=31005 PROTO=TCP SPT=47732 DPT=51737 WINDOW=52272 RES=0x00 ACK PSH URGP=0 [127981.982628] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=67.170.71.136 DST=192.168.10.2 LEN=338 TOS=0x00 PREC=0x00 TTL=106 ID=31903 PROTO=TCP SPT=47732 DPT=51737 WINDOW=52272 RES=0x00 ACK PSH URGP=0 [127998.408841] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=67.170.71.136 DST=192.168.10.2 LEN=338 TOS=0x00 PREC=0x00 TTL=106 ID=961 DF PROTO=TCP SPT=47732 DPT=51737 WINDOW=52272 RES=0x00 ACK PSH URGP=0 [128029.681743] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=67.170.71.136 DST=192.168.10.2 LEN=338 TOS=0x00 PREC=0x00 TTL=106 ID=5427 DF PROTO=TCP SPT=47732 DPT=51737 WINDOW=52272 RES=0x00 ACK PSH URGP=0 [128091.110375] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=67.170.71.136 DST=192.168.10.2 LEN=434 TOS=0x00 PREC=0x00 TTL=106 ID=15212 DF PROTO=TCP SPT=47732 DPT=51737 WINDOW=52272 RES=0x00 ACK PSH URGP=0 [128618.786461] ------------[ cut here ]------------ [128618.786467] kernel BUG at kernel/exit.c:822! [128618.786470] invalid opcode: 0000 [#1] SMP [128618.786473] Modules linked in: ipt_MASQUERADE xt_DSCP nf_conntrack_irc nf_conntrack_ftp aes_i586 aes_generic ecb crypto_blkcipher ecryptfs xt_multiport nvidia(P) binfmt_misc rfcomm l2cap bluetooth vboxnetadp vboxnetflt vboxdrv ppdev parport_pc lp parport autofs4 battery nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc ipt_REJECT ipt_LOG xt_limit xt_tcpudp xt_state iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables quota_v1 fuse dm_snapshot dm_mirror dm_log dm_mod coretemp loop snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse i2c_i801 snd_timer snd_seq_device pcspkr serio_raw usblp i2c_core snd soundcore intel_agp snd_page_alloc button agpgart evdev dcdbas ext3 jbd mbcache sg usb_storage usbhid hid ff_memless sr_mod cdrom sd_mod ahci libata scsi_mod dock ehci_hcd uhci_hcd usbcore e1000e thermal processor fan thermal_sys [last unloaded: scsi_wait_scan] [128618.786554] [128618.786557] Pid: 17799, comm: chrome Tainted: P (2.6.26-2-686 #1) [128618.786560] EIP: 0060:[<c012529d>] EFLAGS: 00210287 CPU: 0 [128618.786566] EIP is at do_exit+0x40c/0x5bb [128618.786569] EAX: f6b1bb20 EBX: f6b1b9f8 ECX: f6b1bb20 EDX: f6b1badc [128618.786571] ESI: f6b1ba00 EDI: f6b1b9f8 EBP: f6b1ba00 ESP: ea9a1f80 [128618.786574] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [128618.786577] Process chrome (pid: 17799, ti=ea9a0000 task=f6b1ba00 task.ti=ea9a0000) [128618.786579] Stack: 00000000 00000000 ea9a1f88 ea9a1f88 f463cbc0 f5bc7580 00000000 ea9a0000 [128618.786586] c01254b0 00000000 bf8a65f4 bf8a6c5b c01254e6 c0103853 00000000 00000000 [128618.786593] 00000000 bf8a65f4 bf8a6c5b bf8a6a28 000000fc 0000007b 0000007b 00000000 [128618.786600] Call Trace: [128618.786622] [<c01254b0>] do_group_exit+0x64/0x8d [128618.786634] [<c01254e6>] sys_exit_group+0xd/0x10 [128618.786638] [<c0103853>] sysenter_past_esp+0x78/0xb1 [128618.786680] ======================= [128618.786681] Code: dc 00 00 00 39 c2 75 ce f0 81 05 00 ea 36 c0 00 00 00 01 fb 0f 1f 84 00 00 00 00 00 90 8d 86 20 01 00 00 39 86 20 01 00 00 74 04 <0f> 0b eb fe 39 96 dc 00 00 00 74 04 0f 0b eb fe 8b 5c 24 08 81 [128618.786719] EIP: [<c012529d>] do_exit+0x40c/0x5bb SS:ESP 0068:ea9a1f80 [128618.786727] ---[ end trace 9904bb7e61a3dc7b ]--- [128618.786729] Fixing recursive fault but reboot is needed! [130190.776690] Not cloning cgroup for unused subsystem ns [130448.361090] Not cloning cgroup for unused subsystem ns [143806.869452] Not cloning cgroup for unused subsystem ns [143920.305782] Not cloning cgroup for unused subsystem ns [145361.152124] Not cloning cgroup for unused subsystem ns [163617.465532] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=83.204.240.115 DST=192.168.10.2 LEN=108 TOS=0x00 PREC=0x00 TTL=47 ID=22910 DF PROTO=TCP SPT=51413 DPT=42801 WINDOW=65535 RES=0x00 ACK PSH URGP=0 [165151.270373] Not cloning cgroup for unused subsystem ns [165347.859562] ------------[ cut here ]------------ [165347.859562] kernel BUG at kernel/exit.c:822! [165347.859562] invalid opcode: 0000 [#2] SMP [165347.859562] Modules linked in: ipt_MASQUERADE xt_DSCP nf_conntrack_irc nf_conntrack_ftp aes_i586 aes_generic ecb crypto_blkcipher ecryptfs xt_multiport nvidia(P) binfmt_misc rfcomm l2cap bluetooth vboxnetadp vboxnetflt vboxdrv ppdev parport_pc lp parport autofs4 battery nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc ipt_REJECT ipt_LOG xt_limit xt_tcpudp xt_state iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables quota_v1 fuse dm_snapshot dm_mirror dm_log dm_mod coretemp loop snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse i2c_i801 snd_timer snd_seq_device pcspkr serio_raw usblp i2c_core snd soundcore intel_agp snd_page_alloc button agpgart evdev dcdbas ext3 jbd mbcache sg usb_storage usbhid hid ff_memless sr_mod cdrom sd_mod ahci libata scsi_mod dock ehci_hcd uhci_hcd usbcore e1000e thermal processor fan thermal_sys [last unloaded: scsi_wait_scan] [165347.859562] [165347.859562] Pid: 4922, comm: chrome Tainted: P D (2.6.26-2-686 #1) [165347.859562] EIP: 0060:[<c012529d>] EFLAGS: 00210206 CPU: 1 [165347.859562] EIP is at do_exit+0x40c/0x5bb [165347.859562] EAX: d851b2e0 EBX: d851b1b8 ECX: d851b2e0 EDX: d851b29c [165347.859562] ESI: d851b1c0 EDI: d851b1b8 EBP: d851b1c0 ESP: d781ff80 [165347.859562] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [165347.859562] Process chrome (pid: 4922, ti=d781e000 task=d851b1c0 task.ti=d781e000) [165347.859562] Stack: 00000000 00000000 d781ff88 d781ff88 f6f3d440 f5bc7040 00000000 d781e000 [165347.859562] c01254b0 00000000 bf8c6e24 bf8c748b c01254e6 c0103853 00000000 00000000 [165347.859562] 00000000 bf8c6e24 bf8c748b bf8c7258 000000fc 0000007b 0000007b 00000000 [165347.859562] Call Trace: [165347.859562] [<c01254b0>] do_group_exit+0x64/0x8d [165347.859562] [<c01254e6>] sys_exit_group+0xd/0x10 [165347.859562] [<c0103853>] sysenter_past_esp+0x78/0xb1 [165347.859562] ======================= [165347.859562] Code: dc 00 00 00 39 c2 75 ce f0 81 05 00 ea 36 c0 00 00 00 01 fb 0f 1f 84 00 00 00 00 00 90 8d 86 20 01 00 00 39 86 20 01 00 00 74 04 <0f> 0b eb fe 39 96 dc 00 00 00 74 04 0f 0b eb fe 8b 5c 24 08 81 [165347.859562] EIP: [<c012529d>] do_exit+0x40c/0x5bb SS:ESP 0068:d781ff80 [165347.859562] ---[ end trace 9904bb7e61a3dc7b ]--- [165347.859562] Fixing recursive fault but reboot is needed! [166701.421302] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=83.204.240.115 DST=192.168.10.2 LEN=108 TOS=0x00 PREC=0x00 TTL=47 ID=59152 DF PROTO=TCP SPT=51413 DPT=32981 WINDOW=65535 RES=0x00 ACK PSH URGP=0 [168880.729795] Not cloning cgroup for unused subsystem ns [188984.065049] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=69.165.129.2 DST=192.168.10.2 LEN=184 TOS=0x00 PREC=0x00 TTL=117 ID=51406 PROTO=TCP SPT=6346 DPT=53360 WINDOW=65467 RES=0x00 ACK PSH URGP=0 [189083.291064] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=69.165.129.2 DST=192.168.10.2 LEN=188 TOS=0x00 PREC=0x00 TTL=117 ID=62648 DF PROTO=TCP SPT=6346 DPT=53360 WINDOW=65467 RES=0x00 ACK PSH URGP=0 [189182.431198] Inbound IN=eth0 OUT= MAC=00:16:76:bc:3f:af:00:22:6b:48:cf:73:08:00 SRC=69.165.129.2 DST=192.168.10.2 LEN=192 TOS=0x00 PREC=0x00 TTL=117 ID=8012 DF PROTO=TCP SPT=6346 DPT=53360 WINDOW=65467 RES=0x00 ACK PSH URGP=0 [254324.293208] Not cloning cgroup for unused subsystem ns [256379.722444] ------------[ cut here ]------------ [256379.722444] kernel BUG at kernel/exit.c:822! [256379.722444] invalid opcode: 0000 [#3] SMP [256379.722444] Modules linked in: ipt_MASQUERADE xt_DSCP nf_conntrack_irc nf_conntrack_ftp aes_i586 aes_generic ecb crypto_blkcipher ecryptfs xt_multiport nvidia(P) binfmt_misc rfcomm l2cap bluetooth vboxnetadp vboxnetflt vboxdrv ppdev parport_pc lp parport autofs4 battery nfsd auth_rpcgss exportfs nfs lockd nfs_acl sunrpc ipt_REJECT ipt_LOG xt_limit xt_tcpudp xt_state iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables quota_v1 fuse dm_snapshot dm_mirror dm_log dm_mod coretemp loop snd_hda_intel snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq psmouse i2c_i801 snd_timer snd_seq_device pcspkr serio_raw usblp i2c_core snd soundcore intel_agp snd_page_alloc button agpgart evdev dcdbas ext3 jbd mbcache sg usb_storage usbhid hid ff_memless sr_mod cdrom sd_mod ahci libata scsi_mod dock ehci_hcd uhci_hcd usbcore e1000e thermal processor fan thermal_sys [last unloaded: scsi_wait_scan] [256379.722444] [256379.722444] Pid: 5954, comm: chrome Tainted: P D (2.6.26-2-686 #1) [256379.722444] EIP: 0060:[<c012529d>] EFLAGS: 00210202 CPU: 0 [256379.722444] EIP is at do_exit+0x40c/0x5bb [256379.722444] EAX: c248fa60 EBX: c248f938 ECX: c248fa60 EDX: c248fa1c [256379.722444] ESI: c248f940 EDI: c248f938 EBP: c248f940 ESP: e4d2bf80 [256379.722444] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 [256379.722444] Process chrome (pid: 5954, ti=e4d2a000 task=c248f940 task.ti=e4d2a000) [256379.722444] Stack: 00000000 00000000 e4d2bf88 e4d2bf88 f5a85080 e4e50580 00000000 e4d2a000 [256379.722444] c01254b0 00000000 bfb44094 bfb446fb c01254e6 c0103853 00000000 00000000 [256379.722444] 00000000 bfb44094 bfb446fb bfb444c8 000000fc 0000007b 0000007b 00000000 [256379.722444] Call Trace: [256379.722444] [<c01254b0>] do_group_exit+0x64/0x8d [256379.722444] [<c01254e6>] sys_exit_group+0xd/0x10 [256379.722444] [<c0103853>] sysenter_past_esp+0x78/0xb1 [256379.722444] ======================= [256379.722444] Code: dc 00 00 00 39 c2 75 ce f0 81 05 00 ea 36 c0 00 00 00 01 fb 0f 1f 84 00 00 00 00 00 90 8d 86 20 01 00 00 39 86 20 01 00 00 74 04 <0f> 0b eb fe 39 96 dc 00 00 00 74 04 0f 0b eb fe 8b 5c 24 08 81 [256379.722444] EIP: [<c012529d>] do_exit+0x40c/0x5bb SS:ESP 0068:e4d2bf80 [256379.722444] ---[ end trace 9904bb7e61a3dc7b ]--- [256379.722444] Fixing recursive fault but reboot is needed! [256382.791440] Not cloning cgroup for unused subsystem ns [256733.020137] Not cloning cgroup for unused subsystem ns -- Paul Cartwright Registered Linux user # 367800 Registered Ubuntu User #12459 -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
