Florian Kulzer wrote: > On Sun, Jul 05, 2009 at 11:55:06 -0400, JoeHill wrote: > > Florian Kulzer wrote: > > > Earlier, JoeHill wrote: > > > > Florian Kulzer wrote: > > [...] > > > > > > Please post the output of this: > > > > > > > > > > lspci -knn | grep -iEA2 'broadcom|bcm|wireless|wifi' > > > > > > > > No output :-( > > > > > > What about this: > > > > > > lspci -nn | grep -Ei 'net|lan|14e4|4328' > > > > tablet:/home/lajolla# lspci -nn | grep -Ei 'net|lan|14e4|4328' > > 00:14.0 Bridge [0680]: nVidia Corporation MCP51 Ethernet Controller > > [10de:0269] (rev a3) > > 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 > > [Athlon64/Opteron] Miscellaneous Control [1022:1103] > > What, then, makes you think that you have a "Broadcom Corporation > BCM4328 802.11a/b/g/n (rev 03)" wireless adapter? Is there a PCMCIA card > with this chipset?
That's weird. I swear when I started this whole thing, I ran 'lspci', and got that output. I mean, really, where else could I have gotten that? It was pasted from a terminal, and I don't have any other machines in here with wireless :-) On the front of the notebook, there a label which says 'Broadcom Wireless', and underneath that is an antenna symbol, the word 'Wireless', and a switch to turn the wireless on or off. I of course have tried all this with the indicator in both positions. However, now when I run lsusb, I get this: Bus 002 Device 003: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth + WLAN) Interface [Integrated Module] Could I have changed something when I installed the Windows driver from HP with ndiswrapper? I've since removed the driver _and_ ndiswrapper. -- J -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
