lrhorer wrote:
Wayne Topa wrote:
lrhorer wrote:
I have CUPS setup under Debian "Lenny" an an AMD Athlon 64 x 2 CPU with
4G
of RAM. I cannot get the system to print to my HP Deskjet 940c printer
attached via USB. The system says it sees the printer,
2. What does lpstat -t show when run by root or a user?
RAID-Server:/etc# lpstat -t
scheduler is running
system default destination: DESKJET_940C
device for DESKJET_940C: usb://HP/DESKJET%20940C?serial=MX22C6D0Q3BH
device for PhotoSmartPrinter: socket://192.168.0.32:9100
DESKJET_940C accepting requests since Sun 07 Jun 2009 07:39:32 AM CDT
PhotoSmartPrinter accepting requests since Sat 30 May 2009 10:01:32 PM CDT
printer DESKJET_940C now printing DESKJET_940C-0. enabled since Sun 07 Jun
2009 07:39:32 AM CDT
printer PhotoSmartPrinter is idle. enabled since Sat 30 May 2009 10:01:32
PM CDT
DESKJET_940C-13 root 18432 Sat 30 May 2009 10:15:55 PM
CDT
DESKJET_940C-14 root 18432 Sat 30 May 2009 10:31:54 PM
CDT
DESKJET_940C-15 root 18432 Sat 30 May 2009 10:33:48 PM
CDT
RAID-Server:/etc#
It should show what printer is 'seen' by cups.
It looks like it is there. When I pull or replace the USB cable, the status
changes accordingly.
Have you checked the error_log to see if it has any clues?
3. If lpstat -t says it can't find the server, see a post by me about
"Strange printer problems" on June 3.
It doesn't sound like the same issue, I don't think.
Your right, it isn't the same problem but just as frustrating. :-(
Good luck
Wayne
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
