E1000 nic fails; used to work

[Kent West]

I've got a fairly new Dell GX260 with an integrated gigabit nic. I 
started out with 2.2.20 (stable), but that didn't recognize the nic, so 
I used Knoppix to download a newer kernel (2.4.18, and all the attendent 
dependencies), and after adding "e1000" to /etc/modules, the network 
started working for me! Yea! I then promptly upgraded to unstable.

That worked for several weeks, until my office mate returned to work, 
and booted into Windows (dual-boot, obviously). Now when I boot into 
Debian, dhcp doesn't find any address, and when I manually run 
"/etc/init.d/networking start" I get errors like "recieve_packet failed 
on eth0" and "network is down". The network works fine from Windows, as 
this email is proof.

I tried another kernel upgrade, this time to 2.4.18-4-686, but the 
network responds the same. I figured I'd try a static address, to see 
what that results in. Here's my interfaces file, and the results.

[EMAIL PROTECTED]:/home/westk> cat /etc/network/interfaces
# /etc/network/interfaces -- configuration file for ifup(8), ifdown(8)
# The loopback interface
auto lo eth0
iface lo inet loopback
#iface eth0 inet dhcp

iface eth0 inet static
       address 150.252.161.230
       netmask 255.255.248.0


[EMAIL PROTECTED]:/etc/network> sudo /etc/init.d/networking start
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces... done.
e1000: eth0 NIC Link is Up 10 Mbps Half Duplex
Mon Aug 25   16:52:39
---------
[EMAIL PROTECTED]:/etc/network> ping 150.252.128.193
PING 150.252.128.193 (150.252.128.193): 56 data bytes
ping: sendto: Network is unreachable
ping: wrote 150.252.128.193 64 chars, ret=-1
ping: sendto: Network is unreachable
ping: wrote 150.252.128.193 64 chars, ret=-1


Any clues would be appreciated.

--
Kent


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED] 
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]