I've been having problems burning DVDs using K3B recently. I know I used to do
this, not too long ago, maybe 2-3 months..
Now I'm getting errors, and K3B says it burns the DVD, then ejects it, but it
is empty. Or it stops about 30% of the way and errors out. I've tried slowing
down the burn rate, no luck. I have no clue what to do. I even tried running
K3B from a root terminal. When I run k3b to create a video DVD here is the
console output:
Capacity: 510:38:38 (LBA 2297888) (4706074624 Bytes)
Remaining size: 510:38:38 (LBA 2297888) (4706074624 Bytes)
Used Size: 00:00:00 (LBA 0) (0 Bytes)
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 72
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported
length: 68
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET
PERFORMANCE: 4
(K3bDevice::Device) /dev/scd0 : 22160 KB/s
(K3bDevice::Device) /dev/scd0 : 16620 KB/s
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
adding udi /org/freedesktop/Hal/devices/volume_empty_dvd_r
(K3bDevice::Device) /dev/scd0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/scd0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/scd0: GET CONFIGURATION length det failed.
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 72
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE successful with reported
length: 68
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via GET
PERFORMANCE: 4
(K3bDevice::Device) /dev/scd0 : 22160 KB/s
(K3bDevice::Device) /dev/scd0 : 16620 KB/s
(K3bDevice::Device) /dev/scd0 : 11080 KB/s
(K3bDevice::Device) /dev/scd0 : 5540 KB/s
First sec data area: 43:41:33 (LBA 196608) (402653184
Last sec data area: 202:21:17 (LBA 910592) (1864892416 Bytes)
Last sec layer 1: 00:00:00 (LBA 0) (0 Bytes)
Layer 1 length: 00:00:01 (LBA 1) (2048 Bytes)
Layer 2 length: 202:21:17 (LBA 910592) (1864892416 Bytes)
DiskInfo:
Mediatype: DVD-R Sequential
Current Profile: DVD-R Sequential
Disk state: incomplete
Empty: 0
Rewritable: 0
Appendable: 1
Sessions: 0
Tracks: 1
Layers: 1
Capacity: 510:46:46 (LBA 2298496) (4707319808 Bytes)
Remaining size: 510:46:45 (LBA 2298495) (4707317760 Bytes)
Used Size: 00:00:01 (LBA 1) (2048 Bytes)
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE dataLen = 8
(K3bDevice::Device) /dev/scd0: GET PERFORMANCE reports bogus dataLen: 8
(K3bDevice::Device) /dev/scd0: Number of supported write speeds via 2A: 4
(K3bDevice::Device) /dev/scd0 : 8468 KB/s
(K3bDevice::Device) /dev/scd0 : 7056 KB/s
(K3bDevice::Device) /dev/scd0 : 4234 KB/s
(K3bDevice::Device) /dev/scd0 : 2822 KB/s
(K3bDevice::ScsiCommand) failed:
command: READ (10) (28)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 0
(K3bDevice::Device) /dev/scd0: READ 10 failed!
(K3bDevice::ScsiCommand) failed:
command: READ (10) (28)
errorcode: 70
sense key: NOT READY (2)
asc: 3a
ascq: 0
(K3bDevice::Device) /dev/scd0: READ 10 failed!
( did that sequence quite a few more times..)
---------------------------------------
it ejected the DVD, said success, yet the DVD is blank
--
Paul Cartwright
Registered Linux user # 367800
Registered Ubuntu User #12459
--
To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
