David A. Parker wrote:
Thomas H. George wrote:
If your slave drive has failed completely, it's possible that your
master drive needs to be jumpered as "single" instead of "master" (if
it is one of those drives which make that distinction). Sometimes the
BIOS will get hung up for a while trying to find a second drive
because the first drive says there should be one.
Hope this helps.
- Dave
Thanks, switching that jumper did the trick. Now every step - load
BIOS, load grub, bootup - completes quickly.
Tom
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
