On Sat, 8 Nov 2008 17:27:04 +0100, Florian Kulzer <[EMAIL PROTECTED]> wrote: > > tail -fn0 /var/log/syslog > > This will list all new messages appearing in the system log. (You can > exit with CTRL-C.) Then plug in the camera, turn it on, and wait at > least thirty seconds. Post the syslog messages here; they might tell us > what goes wrong. >
Here is the log: virsik:~# tail -fn0 /var/log/syslog Nov 9 10:54:10 virsik kernel: [ 4008.232143] usb 4-3: new high speed USB device using ehci_hcd and address 2 Nov 9 10:54:10 virsik kernel: [ 4008.385061] usb 4-3: configuration #1 chosen from 1 choice Nov 9 10:54:10 virsik kernel: [ 4008.385834] usb 4-3: New USB device found, idVendor=0a17, idProduct=00a7 Nov 9 10:54:10 virsik kernel: [ 4008.385842] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Nov 9 10:54:10 virsik kernel: [ 4008.385845] usb 4-3: Product: Optio E50 Nov 9 10:54:10 virsik kernel: [ 4008.385848] usb 4-3: Manufacturer: PENTAX Corporation Nov 9 10:54:10 virsik kernel: [ 4008.385851] usb 4-3: SerialNumber: 1153315 Nov 9 10:54:10 virsik NetworkManager: <debug> [1226220850.413979] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315'). Nov 9 10:54:10 virsik kernel: [ 4008.494770] Initializing USB Mass Storage driver... Nov 9 10:54:10 virsik kernel: [ 4008.496656] scsi0 : SCSI emulation for USB Mass Storage devices Nov 9 10:54:10 virsik kernel: [ 4008.497224] usbcore: registered new interface driver usb-storage Nov 9 10:54:10 virsik kernel: [ 4008.497231] USB Mass Storage support registered. Nov 9 10:54:10 virsik kernel: [ 4008.498687] usb-storage: device found at 2 Nov 9 10:54:10 virsik kernel: [ 4008.498694] usb-storage: waiting for device to settle before scanning Nov 9 10:54:10 virsik NetworkManager: <debug> [1226220850.507788] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_if0'). Nov 9 10:54:10 virsik NetworkManager: <debug> [1226220850.553348] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_usbraw'). Nov 9 10:54:15 virsik kernel: [ 4013.496310] usb-storage: device scan complete Nov 9 10:54:15 virsik kernel: [ 4013.496916] scsi 0:0:0:0: Direct-Access PENTAX Optio E50 1.00 PQ: 0 ANSI: 0 CCS Nov 9 10:54:15 virsik kernel: [ 4013.572005] Driver 'sd' needs updating - please use bus_type methods Nov 9 10:54:15 virsik kernel: [ 4013.576402] sd 0:0:0:0: [sda] 4022273 512-byte hardware sectors (2059 MB) Nov 9 10:54:15 virsik kernel: [ 4013.577031] sd 0:0:0:0: [sda] Write Protect is off Nov 9 10:54:15 virsik kernel: [ 4013.577037] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 Nov 9 10:54:15 virsik kernel: [ 4013.577040] sd 0:0:0:0: [sda] Assuming drive cache: write through Nov 9 10:54:15 virsik kernel: [ 4013.579146] sd 0:0:0:0: [sda] 4022273 512-byte hardware sectors (2059 MB) Nov 9 10:54:15 virsik kernel: [ 4013.579776] sd 0:0:0:0: [sda] Write Protect is off Nov 9 10:54:15 virsik kernel: [ 4013.579782] sd 0:0:0:0: [sda] Mode Sense: 00 00 00 00 Nov 9 10:54:15 virsik kernel: [ 4013.579786] sd 0:0:0:0: [sda] Assuming drive cache: write through Nov 9 10:54:15 virsik kernel: [ 4013.579790] sda: sda1 Nov 9 10:54:15 virsik kernel: [ 4013.581968] sd 0:0:0:0: [sda] Attached SCSI removable disk Nov 9 10:54:15 virsik NetworkManager: <debug> [1226220855.575699] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_if0_scsi_host'). Nov 9 10:54:15 virsik NetworkManager: <debug> [1226220855.582552] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_if0_scsi_host_scsi_device_lun0'). Nov 9 10:54:18 virsik kernel: [ 4016.216143] usb 4-3: reset high speed USB device using ehci_hcd and address 2 Nov 9 10:54:33 virsik kernel: [ 4031.328145] usb 4-3: device descriptor read/64, error -110 Nov 9 10:54:48 virsik kernel: [ 4046.544146] usb 4-3: device descriptor read/64, error -110 Nov 9 10:54:48 virsik kernel: [ 4046.760149] usb 4-3: reset high speed USB device using ehci_hcd and address 2 Nov 9 10:55:03 virsik kernel: [ 4061.872212] usb 4-3: device descriptor read/64, error -110 Nov 9 10:55:19 virsik kernel: [ 4077.088139] usb 4-3: device descriptor read/64, error -110 Nov 9 10:55:19 virsik kernel: [ 4077.304136] usb 4-3: reset high speed USB device using ehci_hcd and address 2 Nov 9 10:55:29 virsik kernel: [ 4087.712157] usb 4-3: device not accepting address 2, error -110 Nov 9 10:55:29 virsik kernel: [ 4087.824141] usb 4-3: reset high speed USB device using ehci_hcd and address 2 Nov 9 10:55:40 virsik kernel: [ 4098.232143] usb 4-3: device not accepting address 2, error -110 Nov 9 10:55:40 virsik kernel: [ 4098.232201] usb 4-3: USB disconnect, address 2 Nov 9 10:55:40 virsik kernel: [ 4098.232542] sd 0:0:0:0: Device offlined - not ready after error recovery Nov 9 10:55:40 virsik kernel: [ 4098.233085] sd 0:0:0:0: [sda] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK Nov 9 10:55:40 virsik kernel: [ 4098.233093] end_request: I/O error, dev sda, sector 4022272 Nov 9 10:55:40 virsik kernel: [ 4098.233098] Buffer I/O error on device sda, logical block 4022272 Nov 9 10:55:40 virsik kernel: [ 4098.233247] Buffer I/O error on device sda, logical block 4022272 Nov 9 10:55:40 virsik kernel: [ 4098.233291] Buffer I/O error on device sda, logical block 4022264 Nov 9 10:55:40 virsik kernel: [ 4098.233299] Buffer I/O error on device sda, logical block 4022265 Nov 9 10:55:40 virsik kernel: [ 4098.233306] Buffer I/O error on device sda, logical block 4022266 Nov 9 10:55:40 virsik kernel: [ 4098.233313] Buffer I/O error on device sda, logical block 4022267 Nov 9 10:55:40 virsik kernel: [ 4098.233320] Buffer I/O error on device sda, logical block 4022268 Nov 9 10:55:40 virsik kernel: [ 4098.233327] Buffer I/O error on device sda, logical block 4022269 Nov 9 10:55:40 virsik kernel: [ 4098.233334] Buffer I/O error on device sda, logical block 4022270 Nov 9 10:55:40 virsik kernel: [ 4098.233341] Buffer I/O error on device sda, logical block 4022271 Nov 9 10:55:40 virsik kernel: [ 4098.234102] scsi 0:0:0:0: rejecting I/O to dead device Nov 9 10:55:40 virsik NetworkManager: <debug> [1226220940.247971] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_if0_scsi_host_scsi_device_lun0'). Nov 9 10:55:40 virsik NetworkManager: <debug> [1226220940.250795] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_if0_scsi_host'). Nov 9 10:55:40 virsik NetworkManager: <debug> [1226220940.258623] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_if0'). Nov 9 10:55:40 virsik NetworkManager: <debug> [1226220940.288495] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315_usbraw'). Nov 9 10:55:40 virsik NetworkManager: <debug> [1226220940.295192] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_a17_a7_1153315'). Nov 9 10:55:40 virsik kernel: [ 4098.364147] usb 4-3: new high speed USB device using ehci_hcd and address 3 Nov 9 10:55:55 virsik kernel: [ 4113.476137] usb 4-3: device descriptor read/64, error -110 Nov 9 10:56:10 virsik kernel: [ 4128.692145] usb 4-3: device descriptor read/64, error -110 Nov 9 10:56:10 virsik kernel: [ 4128.908140] usb 4-3: new high speed USB device using ehci_hcd and address 4 Nov 9 10:56:26 virsik kernel: [ 4144.020138] usb 4-3: device descriptor read/64, error -110 Nov 9 10:56:41 virsik kernel: [ 4159.236176] usb 4-3: device descriptor read/64, error -110 Nov 9 10:56:41 virsik kernel: [ 4159.452162] usb 4-3: new high speed USB device using ehci_hcd and address 5 Nov 9 10:56:51 virsik kernel: [ 4169.860029] usb 4-3: device not accepting address 5, error -110 Nov 9 10:56:51 virsik kernel: [ 4169.972157] usb 4-3: new high speed USB device using ehci_hcd and address 6 Nov 9 10:57:02 virsik kernel: [ 4180.380136] usb 4-3: device not accepting address 6, error -110 Nov 9 10:57:02 virsik kernel: [ 4180.380167] hub 4-0:1.0: unable to enumerate USB device on port 3 Nov 9 10:57:02 virsik kernel: [ 4180.772038] usb 2-1: new full speed USB device using uhci_hcd and address 2 Nov 9 10:57:17 virsik kernel: [ 4195.884032] usb 2-1: device descriptor read/64, error -110 Nov 9 10:57:33 virsik kernel: [ 4211.100035] usb 2-1: device descriptor read/64, error -110 Nov 9 10:57:33 virsik kernel: [ 4211.316029] usb 2-1: new full speed USB device using uhci_hcd and address 3 Nov 9 10:57:48 virsik kernel: [ 4226.428038] usb 2-1: device descriptor read/64, error -110 Nov 9 10:58:03 virsik kernel: [ 4241.644037] usb 2-1: device descriptor read/64, error -110 Nov 9 10:58:03 virsik kernel: [ 4241.860029] usb 2-1: new full speed USB device using uhci_hcd and address 4 Nov 9 10:58:14 virsik kernel: [ 4252.268030] usb 2-1: device not accepting address 4, error -110 Nov 9 10:58:14 virsik kernel: [ 4252.380043] usb 2-1: new full speed USB device using uhci_hcd and address 5 Nov 9 10:58:24 virsik kernel: [ 4262.788030] usb 2-1: device not accepting address 5, error -110 Nov 9 10:58:24 virsik kernel: [ 4262.788060] hub 2-0:1.0: unable to enumerate USB device on port 1 -- Virgo Pärna [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
