Florian Kulzer escreveu: > IIRC, the installer allows you to switch to a VT and run lsmod. Check > which pata module is used, try to blacklist it if it is the wrong one. > Check "modinfo pata_marvell" to see if that one is available. If I am > not mistaken, running the installer in expert mode lets you select which > modules will and will not get loaded, or you can try the > module_name.blacklist=yes boot parameter to avoid loading problematic > modules. >
I've not tried with blacklisting. However, I did try loading that module, and it appears not to exist. The corresponding file could not be found in /lib/modules. Perhaps I'll try again when I'm home. > There are two devices with that name in the pci.ids table, one with the > numerical IDs [1969:1026] and the other with [1969:1048]. Which one do > you have? Check with "lspci -nn", or even better, "lspci -knn" on the > Ubuntu system to see which driver it uses. It should be either atl1e or > atl1. Try to modprobe the correct one with the Debian installer and > check dmesg for errors. > -k is the option I was looking for, thanks for this tip. -- Eduardo M Kalinowski [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
